Product Images
Multilayer Durapore Cartridge Filter
Description:
Durapore Cartridge Filter 20 in. 0.45/0.22 µm Code 0
Trade Name:
Durapore
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Filtration Area, m²:
1.1
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 135 °C. Reverse: 3.5 (50) @ 25 °C, intermittent
Diameter, cm (in):
6.9 (2.7)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L
Bubble Point at 23 °C:
≥3450 mbar (50 psig) air with water
Cartridge Nominal Length, in (cm):
20 (50)
TOC/Conductivity:
After sterilization and a controlled water flush of 16 L per 10-inch cartridge, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
Pore Size (µm):
0.45 / 0.22
Wettability:
Hydrophilic
Sterilization:
30 SIP cycles of 30 min @ 135 °C; 30 autoclave cycles of 60 min @ 126 °C
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Indirect Food Additive:
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Bacterial Retention:
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Air Diffusion at 23 °C:
≤21.6 mL/min @ 2.75 bar (40 psig) in water
Product Name:
Multilayer Durapore Cartridge Filter
Non-Fiber Releasing:
This product was manufactured with a Durapore membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Bacterial Endotoxins:
Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Configuration:
Cartridge
Chemistry:
Hydrophilic PVDF
Cartridge Code:
Code 0 (2-222) O-rings
Media:
Durapore®
Support Material:
Polypropylene
Code:
Code 0
Seal Material:
Silicone
Device Size (in):
20