Ordering Information

	Polygard‑CR Cartridge Filters Polygard-CR cartridge filters are manufactured from 100% polypropylene to provide wide chemical compatibility. A full range of nominal pore sizes with high retention efficiency lets you optimize for your specific process stream. » More…
	Polygard‑CR Cartridge Filters Polygard^®-CR products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard-CR filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility. They are available in two formats, eleven pore sizes, and multiple configurations that vary by filtration area and the type of inlet/outlet connection. Opticap XL disposable capsule filters Cartridge filters » More…

Polygard-CR Cartridge Filter

Description:

Polygard-CR Cartridge Filter 30 in. 3.0 µm Code 0 Silicone

Trade Name:

Polygard

Key Applications:

Laboratory Filtration

Diameter, cm (in):

7.0 (2.75)

Sanitization:

30 min with hot water @ 80 °C

Nominal Pore Size, µm:

Configuration:

Cartridge Filter

Cartridge Type:

Liquid

Gravimetric Extractables:

≤50 mg after 24-h soak in water

Cartridge Code:

Code 0 (2-222) O-rings

Wettability:

Hydrophilic

Cartridge Nominal Length, in (cm):

30 (75)

Max Differential Pressure, bar (psid):

4.8 (70) @ 25 °C

Seal Material:

Silicone

Bacterial Endotoxins:

<0.5 EU/mL as determined by the LAL test

Filter Material:

Polypropylene

Oxidizable Substances:

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤15 L

Sterilization:

10 autoclave cycles or SIP @ 126 °C for 30 min

Device Material:

Polypropylene