Product Images
Milligard Cartridge Filter
Description:
Milligard Cartridge Filter 20 in. Code 0 1.2 µm
Trade Name:
Milligard
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Filter Grade:
Standard Milligard Media
Filtration Area, m²:
1.6
Maximum Differential Pressure, bar (psid):
3.5 (50) @ 25 °C
Diameter, cm (in):
7.1 (2.8)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L
Cartridge Nominal Length, in (cm):
20 (50)
Sterilization:
10 autoclave cycles or SIP @ 121 °C for 30 min
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Indirect Food Additive:
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Nominal Pore Size (µm):
1.2
Gravimetric Extractables:
The extractables level was equal to or less than 50 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Product Name:
Milligard Cartridge Filter
Non-Fiber Releasing:
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Configuration:
Cartridge
Chemistry:
Mixed Cellulose Esters
Cartridge Code:
Code 0 (2-222) O-rings
Format:
Single Layer
Support Material:
Polyester
Packaging:
Double Easy-Open bag
Code:
Code 0
Seal Material:
Silicone
Device Size (in):
20