Product Images
Milligard LPB Cartridge Filter
Description:
Milligard Low Protein Binding Cartridge Filter 4 in. Code M 0.2 µm
Trade Name:
Milligard
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Filter Grade:
Low Protein Binding Milligard Media, 0.5/0.2 µm
Filtration Area, m²:
0.28
Maximum Differential Pressure, bar (psid):
3.5 (50) @ 25 °C
Diameter, cm (in):
7.1 (2.8)
Oxidizable Substances:
Meet the requirements of the USP Oxidizable Substances Test after a water flush of: 12 L
Cartridge Nominal Length, in (cm):
4 (10)
Sterilization:
10 autoclave cycles or SIP @ 121 °C for 30 min
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Nominal Pore Size (µm):
0.5 / 0.2
Gravimetric Extractables:
The extractables level was equal to or less than 80 mg per 4-inch cartridge after a 2 L flush and 24 hours in water at controlled room temperature.
Product Name:
Milligard LPB Cartridge Filter
Non-Fiber Releasing:
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Configuration:
Cartridge
Chemistry:
Low Protein-Binding Cellulose Esters
Cartridge Code:
Code M (2-118) O-rings
Format:
Double Layer
Support Material:
Polyester
Packaging:
Double Easy-Open bag
Code:
Code M
Seal Material:
Silicone
Device Size (in):
4