Ordering Information
Product Images
Figure 1. Calcium flux in M4-expressing expressing Chem-4 cell line induced by carbamoyl choline. M4-expressing Chem-4 cells w ...
ChemiSCREEN™ Human Recombinant M4 Muscarinic Acetylcholine Receptor Calcium-Optimized Stable Cell Line
Description:
ChemiSCREEN™ Human Recombinant M4 Muscarinic Acetylcholine Receptor Calcium-Optimized Stable Cell Line
Trade Name:
ChemiScreen
Product Overview:
Full-length human CHRM4 cDNA encoding M4
Background Information:
The muscarinic acetylcholine receptor (mAChR) family consists of five GPCRs that mediate some of the neurotransmission functions of acetylcholine in the CNS and the periphery. The M1, M3 and M5 receptors couple to Gq to mobilize intracellular calcium, whereas the M2 and M4 receptors couple to Gi/o to inhibit cAMP production (Caulfield and Birdsall, 1998). Muscarinic M4 receptor is known to be abundantly expressed in the striatum (Levey 1993). Consistent with this fact, locomotor activity was significantly increased in M4 receptor-deficient mice (Gomeza et al. 1999). Chemicon's cloned human M4 -expressing cell line is made in the Chem-4 host, which supports high levels of recombinant M4 expression on the cell surface and contains high levels of the promiscuous G protein to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between M4 and its ligands.
Application Notes:
Calcium flux assay, ligand binding assay
Usage Statement:
Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
Alternate Names:
mAChR4
Cell Line Type:
GPCR Cell Lines
Host Cells:
Chem-4, an adherent cell line expressing the promiscuous G-protein, Gα15.
Packaging:
2 x 106 cells/vial
Materials Required but Not Delivered:
Chem-4 Growth Media:
DMEM with 4.5 g/L glucose and 4 mM glutamine (Millipore SLM-020-A)
10% heat-inactivated FBS
1x Nonessential amino acids (from 100x stock, Millipore TMS-001-C)
10mM HEPES (from 1 M HEPES, Millipore TMS-003-C)
1x Pen-Strep (from 100x stock, Millipore TMS-AB2-C)
250µg/mL Genetecin/G-418
250µg/mL Hygromycin
Chem-4 Plating Media:
DMEM with 4.5 g/L glucose and 4 mM glutamine
10% heat-inactivated FBS
1x NEAA
10mM HEPES
1x Pen-Strep
Chem-4 Freezing Media:
DMEM with 4.5 g/L glucose and 4 mM glutamine
20% heat-inactivated FBS
1x NEAA
10mM HEPES
1x Pen-Strep
10% DMSO (cell culture grade)
DMEM with 4.5 g/L glucose and 4 mM glutamine (Millipore SLM-020-A)
10% heat-inactivated FBS
1x Nonessential amino acids (from 100x stock, Millipore TMS-001-C)
10mM HEPES (from 1 M HEPES, Millipore TMS-003-C)
1x Pen-Strep (from 100x stock, Millipore TMS-AB2-C)
250µg/mL Genetecin/G-418
250µg/mL Hygromycin
Chem-4 Plating Media:
DMEM with 4.5 g/L glucose and 4 mM glutamine
10% heat-inactivated FBS
1x NEAA
10mM HEPES
1x Pen-Strep
Chem-4 Freezing Media:
DMEM with 4.5 g/L glucose and 4 mM glutamine
20% heat-inactivated FBS
1x NEAA
10mM HEPES
1x Pen-Strep
10% DMSO (cell culture grade)
Cell Type:
Chem-4
Gene Symbol:
- CHRM4
- HM4
Presentation:
Cells are frozen at 2 x 106 cells/mL in DMEM/20% fetal bovine serum/100 U/ml penicillin and streptomycin/10% DMSO. Cell line tests negative for mycoplasma.
Quality Assurance:
EC50 for calcium mobilization by carbamoyl choline: ~ 840 nM
Protein or Enzyme Type:
GPCRs
Species:
Human
Storage Conditions:
1. Immediately upon receipt, thaw cells or place cells in liquid nitrogen. Maintain frozen in liquid nitrogen for up to 5 years.
2. Thaw cells rapidly by removing from liquid nitrogen and immediately immersing in a 37°C water bath. Immediately after ice has thawed, sterilize the exterior of the vial with 70% ethanol. Transfer contents of the vial to a T75 flask containing growth media. Place the flask in a humidified incubator at 37°C with 5% CO2.
3. After 8-24 h, all live cells will be attached. Viability of the cells is expected to be 50-80%. At this time, replace media to remove residual DMSO, and return to incubator.
4. When cells are approximately 80% confluent, passage the cells as follows: Remove media and wash once with HBSS without Ca++ and Mg++ (10 mL/T75). Add 0.05% trypsin/0.2 g/L EDTA (1 mL/T75) and place in humidified incubator at 37°C with 5% CO2 until cells begin to round up and detach (5-10 minutes). Gently rap the side of the flask to dislodge the cells. Neutralize trypsin by addition of 4 mL Chem-4 Growth Media per 1 mL trypsin.
5. Cells are typically passaged 1:10 every 3-4 days. Passaging ratio may be varied according to requirements of the investigator.
6. Frozen stocks of cells should be prepared at the earliest passage possible after thawing, as follows: Count detached cells (prepared as in Step 4). Centrifuge cells at 200 x g for 5 min. Resuspend cells at 5 x 106 cells/mL in Chem-4 Freezing Media (cell densities of 2-10 x 106 are also acceptable if necessary). Dispense 1 mL aliquots into cryopreservation vials. Freeze the cells by a controlled rate process, such as in an isopropanol-jacketed container placed at -70°C overnight. Store the vials in liquid nitrogen.
7. Calcium assay of cells immediately after thawing is feasible for some cell lines, whereas other cell lines may need to be passaged at least once after thawing prior to use in calcium flux assays. Cells should be resuspended in Chem-4 Plating Media for plating for calcium assay.
2. Thaw cells rapidly by removing from liquid nitrogen and immediately immersing in a 37°C water bath. Immediately after ice has thawed, sterilize the exterior of the vial with 70% ethanol. Transfer contents of the vial to a T75 flask containing growth media. Place the flask in a humidified incubator at 37°C with 5% CO2.
3. After 8-24 h, all live cells will be attached. Viability of the cells is expected to be 50-80%. At this time, replace media to remove residual DMSO, and return to incubator.
4. When cells are approximately 80% confluent, passage the cells as follows: Remove media and wash once with HBSS without Ca++ and Mg++ (10 mL/T75). Add 0.05% trypsin/0.2 g/L EDTA (1 mL/T75) and place in humidified incubator at 37°C with 5% CO2 until cells begin to round up and detach (5-10 minutes). Gently rap the side of the flask to dislodge the cells. Neutralize trypsin by addition of 4 mL Chem-4 Growth Media per 1 mL trypsin.
5. Cells are typically passaged 1:10 every 3-4 days. Passaging ratio may be varied according to requirements of the investigator.
6. Frozen stocks of cells should be prepared at the earliest passage possible after thawing, as follows: Count detached cells (prepared as in Step 4). Centrifuge cells at 200 x g for 5 min. Resuspend cells at 5 x 106 cells/mL in Chem-4 Freezing Media (cell densities of 2-10 x 106 are also acceptable if necessary). Dispense 1 mL aliquots into cryopreservation vials. Freeze the cells by a controlled rate process, such as in an isopropanol-jacketed container placed at -70°C overnight. Store the vials in liquid nitrogen.
7. Calcium assay of cells immediately after thawing is feasible for some cell lines, whereas other cell lines may need to be passaged at least once after thawing prior to use in calcium flux assays. Cells should be resuspended in Chem-4 Plating Media for plating for calcium assay.