Sterile Opticap XL Capsule Filter
Description:
Opticap Sterile XL600 Millipore Express SHC 0.5 + 0.2 µm 3/4 in. TC/TC
Trade Name:
Opticap
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Maximum Inlet Temperature, °C:
25
Outlet Connection Diameter (in):
3/4
Inlet Connection Diameter (in):
3/4
Outlet Connection:
Sanitary Flange
Maximum Inlet Pressure, bar (psi):
6.9 (100) intermittent @ 23 °C; 5.5 (80) @ 23 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Maximum Inlet Pressure (psig):
80
Filtration Area, m²:
0.059
Maximum Differential Pressure, bar (psid):
Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
Diameter, cm (in):
5.6 (2.2)
Inlet Connection:
Sanitary Flange
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Bubble Point at 23 °C:
≥4000 mbar (58 psig) air with water
TOC/Conductivity:
After sterilization and a controlled water flush of 3.0 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
Pore Size (µm):
0.5 / 0.2
Wettability:
Hydrophilic
Sterilization:
3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
Housing:
Polypropylene
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Vent Cap Material:
Gamma stable polypropylene
Indirect Food Additive:
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
European Pressure Equipment Directive:
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Bacterial Retention:
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Air Diffusion at 23 °C:
≤3.7 mL/min @ 2.75 bar (40 psig) in water
Product Name:
Sterile Opticap XL Capsule Filter
Non-Fiber Releasing:
This product was manufactured with a Millipore Express membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Filtration Area, cm²:
590
Sterility:
Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Gamma stable polypropylene/Polysulfone
Connections, Inlet/Outlet:
19 mm (3/4 in.) Sanitary Flange
Length, cm (in):
16.5 (6.5)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring seal
Configuration:
Capsule
Chemistry:
Hydrophilic Polyethersulfone
Support Material:
Polyethylene
Inlet to Outlet Width, cm (in):
16.5 (6.5)
Packaging:
Double Easy-Open bag
Seal Material:
Silicone