Content Loading...
Content Loading...
Product Images
Opticap XL Capsule Filter
Recommended Replacement for: SN1M006A6Description:
Opticap XL2 Durapore 0.45 µm without prefilter 9/16 in. HB/HB
Trade Name:
Opticap
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Maximum Inlet Temperature, °C:
25
Outlet Connection Diameter (in):
9/16
Inlet Connection Diameter (in):
9/16
Outlet Connection:
Hose Barb
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C; 2.8 (40) @ 60 °C; 1.0 (15) @ 80 °C
Maximum Inlet Pressure (psig):
80
Filtration Area, m²:
0.09
Maximum Differential Pressure, bar (psid):
Forward: 3.4 (50) @ 25 °C. Reverse: 3.4 (50) @ 25 °C, intermittent
Diameter, cm (in):
8.4 (3.3)
Inlet Connection:
Hose Barb
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL
Bubble Point at 23 °C:
≥1930 mbar (28 psig) air with water
Cartridge Nominal Length, in (cm):
2 (5)
Pore Size (µm):
0.45
Wettability:
Hydrophilic
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Replaces:
SN1M006A6
Housing:
Polypropylene
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
≤10 mg after autoclaving and 24-h soak in water at controlled room temperature
Product Name:
Opticap XL Capsule Filter
Filtration Area, cm²:
900
Sterility:
Non-Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Connections, Inlet/Outlet:
14 mm (9/16 in.) Hose Barb
Length, cm (in):
14.0 (5.5)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Capsule Type:
Liquid
Configuration:
Capsule
Chemistry:
Hydrophilic PVDF
Media:
Durapore®
Support Material:
Polypropylene
Inlet to Outlet Width, cm (in):
14.0 (5.5)
Packaging:
Double Easy-Open bag
Seal Material:
Silicone
Device Size (in):
2