订购信息
产品图片
Opticap Capsule Filter
Description:
Opticap 4 in. Durapore 0.22 µm 1/4 in. NPTM
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Connections, Inlet/Outlet:
6 mm (1/4 in.) NPTM
Length, cm (in):
17.0 (6.7)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Capsule Type:
Liquid
Configuration:
Capsule Filter
Filter Material:
Hydrophilic PVDF
Filter Brand Name:
Durapore
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Filtration Area, m2:
0.14
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.7 (25) @ 80 °C. Reverse: 2.8 (40) @ 25 °C, intermittent
Diameter, cm (in):
7.4 (2.9)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤500 mL
Bubble Point at 23 °C:
≥3450 mbar (50 psig) air with water
Cartridge Nominal Length, in (cm):
4 (10)
Filter Pore Size, µm:
0.22
Support Material:
Polypropylene
Wettability:
Hydrophilic
Packaging:
Easy-Open bag
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Housing:
Polypropylene
Vent Cap Material:
Polypropylene
Nominal Pore Size, µm:
0.22
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Seal Material:
Silicone
Gravimetric Extractables:
≤10 mg after 24-h soak in water
Filtration Area, cm2:
1400
Sterility:
Non-Sterile
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Device Material:
Polypropylene