Ordering Information
Product Images
Opticap XL Capsule Filter
Description:
Opticap XL4 Durapore 0.22 µm TC/HB
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Support Material:
Polypropylene
Air Diffusion at 23 °C:
≤5.5 mL/min @ 2.75 bar (40 psig) in water
Diameter, cm (in):
12.5 (4.9)
Housing:
Polypropylene
Sterility:
Non-Sterile
Packaging:
Double Easy-Open bag
Filtration Area, m2:
0.19
Configuration:
Capsule Filter
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
≤10 mg after 24-h soak in water
Filter Brand Name:
Durapore
Bubble Point at 23 °C:
≥3450 mbar (50 psig) air with water
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange/14 mm (9/16 in.) Hose Barb
Wettability:
Hydrophilic
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 3.5 (50) @ 25 °C, intermittent
Filter Pore Size, µm:
0.22
Seal Material:
Silicone
Capsule Type:
Liquid
Filtration Area, cm2:
1900
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Filter Material:
Hydrophilic PVDF
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤500 mL
Device Material:
Polypropylene
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable