Product Images
Sterile Opticap XL Capsule Filter
Description:
Opticap Sterile 4 in. Durapore 0.22 µm 9/16 in. HB
Trade Name:
Opticap
Qty/Pk:
3
Key Applications:
Laboratory Filtration
Maximum Inlet Temperature, °C:
25
Outlet Connection Diameter (in):
9/16
Inlet Connection Diameter (in):
9/16
Outlet Connection:
Hose Barb
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C; 2.8 (40) @ 60 °C; 1.0 (15) @ 80 °C
Maximum Inlet Pressure (psig):
80
Filtration Area, m²:
0.16
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.7 (25) @ 80 °C. Reverse: 2.8 (40) @ 25 °C, intermittent
Diameter, cm (in):
7.4 (2.9)
Inlet Connection:
Hose Barb
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL
Bubble Point at 23 °C:
≥3450 mbar (50 psig) air with water
Cartridge Nominal Length, in (cm):
4 (10)
Pore Size (µm):
0.22
Wettability:
Hydrophilic
Sterilization:
Shipped sterile by gamma irradiation @ >25 kGray gamma exposure
Housing:
Polypropylene
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Vent Cap Material:
Polypropylene
Indirect Food Additive:
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
European Pressure Equipment Directive:
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Bacterial Retention:
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables:
The extractables level was equal to or less than 10 mg after a 500 mL flush and 24 hours in water at controlled room temperature.
Product Name:
Sterile Opticap XL Capsule Filter
Non-Fiber Releasing:
This product was manufactured with a Durapore membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Filtration Area, cm²:
1600
Sterility:
Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Gamma-stable polypropylene
Connections, Inlet/Outlet:
14 mm (9/16 in.) Hose Barb
Length, cm (in):
16.0 (6.3)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Configuration:
Capsule
Chemistry:
Hydrophilic PVDF
Media:
Durapore®
Support Material:
Polyester; film edge HDPE
Packaging:
Double Easy-Open bag
Seal Material:
Silicone
Device Size (in):
4