Product Images
Opticap Sterilizing Grade XL Capsule Filter
Description:
Opticap XL5 Durapore 0.1 µm 1-1/2 in. TC-9/16 in. HB
Trade Name:
Opticap
Qty/Pk:
1
Key Applications:
Laboratory Filtration
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C; 2.8 (40) @ 60 °C; 1.0 (15) @ 80 °C
Filtration Area, m²:
0.35
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 3.5 (50) @ 25 °C, intermittent
Diameter, cm (in):
14.5 (5.7)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL
Bubble Point at 23 °C:
≥4830 mbar (70 psig) air with water
Cartridge Nominal Length, in (cm):
5 (12.5)
Pore Size (µm):
0.1
Wettability:
Hydrophilic
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Housing:
Polypropylene
Vent Cap Material:
Polypropylene
Nominal Pore Size (µm):
0.1
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Gravimetric Extractables:
≤15 mg after autoclaving and 24-h soak in ASTM Type 1 reagent gradewater
Product Name:
Opticap Sterilizing Grade XL Capsule Filter
Air Diffusion at 23 °C:
≤10 mL/min @ 3.9 bar (56 psig) in water
Filtration Area, cm²:
3500
Sterility:
Non-Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange/14 mm (9/16 in.) Hose Barb
Length, cm (in):
21.3 (8.4)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Configuration:
Capsule
Chemistry:
Hydrophilic PVDF
Media:
Durapore®
Support Material:
Polypropylene
Inlet to Outlet Width, cm (in):
21.3 (8.4)
Packaging:
Double Easy-Open bag
Seal Material:
Silicone