Ordering Information
Product Images
Opticap XLT Capsule Filter
Description:
Opticap XLT20 Durapore 0.1 µm Gamma Compatible 1-1/2 in. TC-5/8 in. HB
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Support Material:
Polyester
Air Diffusion at 23 °C:
≤42.2 mL/min @ 3.9 bar (56 psig) in water
Housing:
Polypropylene
Sterility:
Non-Sterile
Filtration Area, m2:
1.45
Configuration:
Capsule Filter
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
≤50 mg after autoclaving and 24-h soak in water
Filter Brand Name:
Durapore
Bubble Point at 23 °C:
≥4830 mbar (70 psig) air with water
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange/16 mm (5/8 in.) Hose Barb
Wettability:
Hydrophilic
Filter Pore Size, µm:
0.1
Inlet to Outlet Width, cm (in):
17.5 (6.9)
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80) @ 25 °C; 1.7 (25) @ 80 °C. Reverse: 3.5 (50) @ 25 °C, intermittent
Capsule Type:
Liquid
Filtration Area, cm2:
14500
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Filter Material:
Hydrophilic PVDF
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤2 L
Length, cm (in):
62.5 (24.6)
Device Material:
Gamma-stable polypropylene
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable