Opticap XLT Capsule Filter
Description:
Opticap XLT10 Milligard 0.5 µm 1 in. HB/HB
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Support Material:
Polyester
Filter Grade:
Standard Milligard Media
Housing:
Polypropylene
Nominal Pore Size, µm:
0.5
Sterility:
Non-Sterile
Packaging:
Double Easy-Open bag
Filtration Area, m2:
0.8
Format:
Single Layer
Configuration:
Capsule Filter
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
≤55 mg after 24-h soak in water
Filter Brand Name:
Milligard
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Connections, Inlet/Outlet:
25 mm (1 in.) Hose Barb
Wettability:
Hydrophilic
Filter Pore Size, µm:
0.5
Maximum Differential Pressure, bar (psid):
3.5 (50) @ 25 °C
Seal Material:
Silicone
Capsule Type:
Liquid
Filtration Area, cm2:
8000
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Filter Material:
Mixed Cellulose Esters
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤5 L
Device Material:
Polypropylene
Sterilization:
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable