Opticap XLT Capsule Filter
Description:
Opticap XLT10 Milligard 1.2 µm 1 in. HB/HB
Trade Name:
Opticap
Qty/Pk:
1
Key Applications:
Laboratory Filtration
Filter Grade:
Standard Milligard Media
Maximum Inlet Temperature, °C:
25
Outlet Connection Diameter (in):
1
Inlet Connection Diameter (in):
1
Outlet Connection:
Hose Barb
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Maximum Inlet Pressure (psig):
80
Filtration Area, m²:
0.8
Maximum Differential Pressure, bar (psid):
3.5 (50) @ 25 °C
Inlet Connection:
Hose Barb
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Cartridge Nominal Length, in (cm):
10 (25)
Pore Size (µm):
1.2
Sterilization:
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
Housing:
Polypropylene
Vent Cap Material:
Polypropylene
Nominal Pore Size (µm):
1.2
Gravimetric Extractables:
≤55 mg after 24-h soak in water
Product Name:
Opticap XLT Capsule Filter
Filtration Area, cm²:
8000
Sterility:
Non-Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Connections, Inlet/Outlet:
25 mm (1 in.) Hose Barb
Length, cm (in):
37.6 (14.8)
Configuration:
Capsule
Chemistry:
Mixed Cellulose Esters
Media:
Milligard
Format:
Single Layer
Support Material:
Polyester
Inlet to Outlet Width, cm (in):
19.8 (7.8)
Packaging:
Double Easy-Open bag
T-line/Gauge Port:
T-line
Seal Material:
Silicone
Device Size (in):
10