Ordering Information
Product Images
Opticap XL Capsule Filter
Recommended Replacement for: KWSCL4FF3Description:
Opticap XL2 Milligard Low Protein Binding 1.2/0.5 µm 3/4 in. TC/TC
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Support Material:
Polyester
Filter Grade:
Low Protein Binding Milligard Media, 1.2/0.5 µm
Diameter, cm (in):
12.5 (4.9)
Housing:
Polypropylene
Nominal Pore Size, µm:
1.2 + 0.5
Sterility:
Non-Sterile
Packaging:
Double Easy-Open bag
Filtration Area, m2:
0.07
Format:
Double Layer
Configuration:
Capsule Filter
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
≤50 mg after 24-h soak in water and 1 L flush
Filter Brand Name:
Milligard
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Connections, Inlet/Outlet:
19 mm (3/4 in.) Sanitary Flange
Wettability:
Hydrophilic
Cartridge Nominal Length, in (cm):
2 (5)
Maximum Differential Pressure, bar (psid):
3.5 (50) @ 25 °C
Seal Material:
Silicone
Capsule Type:
Liquid
Filtration Area, cm2:
700
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Filter Material:
Low Protein-Binding Cellulose Esters
Replaces:
KWSCL4FF3
Device Material:
Polypropylene
Sterilization:
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable