Opticap XLT 10 Capsule Filter
Description:
Opticap XLT10 Viresolve NFR 1-1/2 in. TC/TC
Trade Name:
Viresolve
Applications:
Retrovirus removal
Key Applications:
Protein Purification
Support Material:
Polypropylene
Air Diffusion at 23 °C:
≤16 mL/min @ 3.45 bar (50 psig) in water
Packaging:
Double Easy-Open bag
Filtration Area, m2:
0.43
Configuration:
Capsule Filter
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
Extractables level after a 10 min 1.5 Lpm/ft2 flush, after 24 hrs in ASTM® Type 1 reagent-grade water at controlled
room temperature: ≤35 mg
room temperature: ≤35 mg
Filter Brand Name:
Viresolve
Bacterial Retention:
Lot release testing on samples exhibited ≥6 LRV for Φ6 (78 nm) at a challenge of 107 pfu/cm2
Hold-up Volume, mL:
175
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C
Process Volume, L:
600–1200
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange
Wettability:
Hydrophilic
Inlet to Outlet Width, cm (in):
15.2 (6.0)
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80). Reverse: 3.4 (50)
Seal Material:
Silicone
Bacterial Endotoxins:
Aqueous extraction contains <0.5 EU/mL as determined by the LAL test
Filter Material:
Polyethersulfone
Oxidizable Substances:
Meet the requirements of the USP Oxidizable Substances Test after a water flush of: 4 L
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Length, cm (in):
38 (15)
Device Material:
Polypropylene
Sterilization:
After wetting, may be autoclaved for 3 cycles of up to 60 min at 125 °C, using liquid cycle, slow exhaust.
Viral Clearance Device Type:
NFF Filters