Opticap XLT 30 Capsule Filter
Description:
Opticap XLT30 Viresolve NFR 1-1/2 in. TC/TC
Trade Name:
Viresolve
Qty/Pk:
1
Applications:
Retrovirus removal
Key Applications:
Protein Purification
Hold-up Volume, mL:
490
Maximum Inlet Temperature, °C:
25
Outlet Connection Diameter (in):
1-1/2
Inlet Connection Diameter (in):
1-1/2
Outlet Connection:
Sanitary Flange
Maximum Inlet Pressure, bar (psi):
5.5 (80) @ 23 °C
Maximum Inlet Pressure (psig):
80
Filtration Area, m²:
1.281
Maximum Differential Pressure, bar (psid):
Forward: 5.5 (80). Reverse: 3.4 (50)
Inlet Connection:
Sanitary Flange
Oxidizable Substances:
Meet the requirements of the USP Oxidizable Substances Test after a water flush of: 12 L
Process Volume, L:
1800–3600
Sterilization:
After wetting, may be autoclaved for 3 cycles of up to 60 min at 125 °C, using liquid cycle, slow exhaust.
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Vent Cap Material:
Polypropylene
Gravimetric Extractables:
The extractables level was equal to or less than 105 mg after a 10 minute 1.5 LPM/ft² flush and 24 hours in water at controlled room temperature.
Air Diffusion at 23 °C:
≤48 mL/min @ 3.45 bar (50 psig) in water
Product Name:
Opticap XLT 30 Capsule Filter
Non-Fiber Releasing:
This product was manufactured with a Viresolve membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange
Length, cm (in):
86 (34)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring Seal
Configuration:
Capsule
Chemistry:
Polyethersulfone
Support Material:
Polypropylene
Inlet to Outlet Width, cm (in):
15.2 (6.0)
Viral Clearance Device Type:
NFF Filters
Packaging:
Double Easy-Open bag
T-line/Gauge Port:
T-line
Seal Material:
Silicone
Device Size (in):
30