Product Images
Millistak+® Lenticular Disc Filters
Description:
Millistak+® Lenticular Disc Filters, B1HC media series, 16 in. diameter, 8-cell, silicone seal, 2/pack
Trade Name:
Millistak+
Qty/Pk:
2
Applications:
Post-centrifuge or settled permeate containing cellular particulate
Key Applications:
Laboratory Filtration
Conductivity, µS/cm:
5–7 umho/cm after a pure water flush of 10 L/ft2 (100 L/m2) of media surface area per autoclaved (1 cycle of 30 minutes at 123 °C) 12" 16-stack device
Filter Grade:
50DE / 75DE / RW01
Configuration:
Stack Disk
Chemistry:
- Cellulose
- Inorganic Filter Aid
- Mixed Cellulose Esters
Filtration Area, m²:
1.8
Maximum Differential Pressure, bar (psid):
Forward: 2.07 (30) @ 25 °C; 1.03 (15) @ 80 °C; 0.21 (3) @ 123 °C
Reverse: 0.03 (0.5)
Reverse: 0.03 (0.5)
Diameter, cm (in):
40.64 (16)
Oxidizable Substances:
The effluent of an autoclaved (1 cycle of 30 minutes @ 123 °C) stacked device is negative after a WFI flush of 10 liters per ft2 (100 L/m2) of media surface area
Wettability:
Hydrophilic
TOC, ppb:
565–1037 post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft2 (100 L/m2) of media surface area
Sterilization:
May be steam sterilized for 3 steam-in-place (SIP) cycles of 30 minutes @ 123 °C
Sanitization:
May be hot water sanitized for 20 cycles using purified water @ 80 °C for 30 minutes
Seal Material:
Silicone
Gravimetric Extractables:
Post autoclave (1 cycle of 30 minutes at 123 °C) and pure water flush of 100 L/m2 (10 L/ft2) of media surface area.
NVR: 1.50 – 2.02 mg/m2
TOC: 416– 593 ppb
NVR: 1.50 – 2.02 mg/m2
TOC: 416– 593 ppb
Product Name:
Millistak+® Lenticular Disc Filters
Stack Design:
16 in. diameter, 8-cell
Bacterial Endotoxins:
Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique
Device Material:
Polypropylene