Content Loading...
Content Loading...
Product Images
Millipak-60 Filter Unit
Description:
Millipak-60 Filling Machine Filter Unit 0.22 µm 1/4 in. NPT-1/4 in.HB
Trade Name:
Millipak
Qty/Pk:
1
Key Applications:
Laboratory Filtration
Outlet Connection Diameter (in):
1/4
Inlet Connection Diameter (in):
1/4
Outlet Connection:
Hose Barb
Maximum Inlet Pressure, bar (psi):
5.2 (75) @ 25 °C
Maximum Differential Pressure, bar (psid):
Forward: 4.1 (60) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 123 °C. Reverse: 0.7 (10) @ 25 °C
Inlet Connection:
NPT
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL
Bubble Point at 23 °C:
≥3450 mbar (50 psig) air with water
Process Volume, L:
30
Pore Size (µm):
0.22
Wettability:
Hydrophilic
Sterilization:
3 autoclave cycles of 90 min @ 123 °C; not in-line steam sterilizable
Vent Cap Material:
PVDF
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Product Name:
Millipak-60 Filter Unit
Sterility:
Non-Sterile
Filtration Area, cm²:
300
Bacterial Endotoxins:
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polycarbonate
Connections, Inlet/Outlet:
6 mm (1/4 in.) NPTM/6 mm (1/4 in.) Hose Barb
Capsule Type:
Liquid
Configuration:
Stack Disk
Chemistry:
Hydrophilic PVDF
Media:
Durapore®
Support Material:
Polycarbonate
Flow Rate, L/min:
7.6 @ 2.9 bar ΔP
Packaging:
Double Easy-Open bag
Device Size (in):
60