Ordering Information
Product Images
Millipak-200 Filter Unit
Description:
Millipak-200 Filter Unit 0.45 µm 1-1/2 in. TC/TC
Trade Name:
Millipak
Key Applications:
Laboratory Filtration
Support Material:
Polycarbonate
Sterility:
Non-Sterile
Packaging:
Double Easy-Open bag
Configuration:
Stack Disk
Vent Cap Material:
PVDF
Gravimetric Extractables:
≤5.0 mg after 24-h soak in water
Filter Brand Name:
Durapore
Bubble Point at 23 °C:
≥1790 mbar (26 psig) air with water
Maximum Inlet Pressure, bar (psi):
5.2 (75) @ 25 °C
Process Volume, L:
100
Connections, Inlet/Outlet:
38 mm (1-1/2 in.) Sanitary Flange
Wettability:
Hydrophilic
Filter Pore Size, µm:
0.45
Maximum Differential Pressure, bar (psid):
Forward: 4.1 (60) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 123 °C. Reverse: 0.7 (10) @ 25 °C
Capsule Type:
Liquid
Filtration Area, cm2:
1000
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Filter Material:
Hydrophilic PVDF
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤200 mL
Device Material:
Polycarbonate
Sterilization:
3 autoclave cycles of 90 min @ 123 °C; not in-line steam sterilizable
Flow Rate, L/min:
23 @ 2.1 bar P