订购信息
产品图片
Millipak-200 Filter Unit
Description:
Millipak-200 Filter Unit 0.1 µm Gamma Compatible 9/16 in. HB/HB
Trade Name:
Millipak
Key Applications:
Laboratory Filtration
Connections, Inlet/Outlet:
14 mm (9/16 in.) Hose Barb
Length, cm (in):
13.0 (5.1)
Capsule Type:
Liquid
Configuration:
Stack Disk
Filter Material:
Hydrophilic PVDF
Filter Brand Name:
Durapore
Maximum Inlet Pressure, bar (psi):
5.2 (75) @ 25 °C
Maximum Differential Pressure, bar (psid):
Forward: 4.1 (60) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 123 °C. Reverse: 0.7 (10) @ 25 °C
Diameter, cm (in):
7.6 (3.0)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤200 mL
Bubble Point at 23 °C:
≥4830 mbar (70 psig) air with water
Process Volume, L:
100
Filter Pore Size, µm:
0.1
Support Material:
Polycarbonate
Flow Rate, L/min:
8.5 @ 2.45 bar ΔP
Wettability:
Hydrophilic
Packaging:
Double Easy-Open bag
Sterilization:
3 autoclave cycles of 90 min @ 123 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
Vent Cap Material:
PVDF
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Gravimetric Extractables:
5.0 mg
Filtration Area, cm2:
1000
Sterility:
Non-Sterile
Bacterial Endotoxins:
<0.5 EU/mL as determined by the LAL test
Device Material:
Polycarbonate