OptiScale 25 Disposable Capsule Filter
Description:
Millipore Express SHR Optiscale 25mm 0.1 µm NB
Trade Name:
Optiscale
Qty/Pk:
6
Key Applications:
Laboratory Filtration
Outlet Connection:
Male Luer Lok
Maximum Inlet Pressure, bar (psi):
4.1 (60) @ 25 °C
Diameter, cm (in):
3.1 (1.2)
Inlet Connection:
Female Luer Lok
Non-Particle Releasing:
This product was tested and passes the USP <788> test for particulates in injectables.
TOC/Conductivity:
After sterilization and a controlled water flush of 15 mL, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645>.
Pore Size (µm):
0.1
Wettability:
Hydrophilic
Sterilization:
1 autoclave cycle of 60 min @ 123 °C
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Vent Cap Material:
Polypropylene
Indirect Food Additive:
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Product Name:
OptiScale 25 Disposable Capsule Filter
Non-Fiber Releasing:
This product was manufactured with a Millipore Express membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Filtration Area, cm²:
3.5
Sterility:
Non-Sterile
Bacterial Endotoxins:
Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material:
Polypropylene
Connections, Inlet/Outlet:
Female Luer Lok/ Male Luer Lok
Length, cm (in):
3.9 (1.52)
Configuration:
Capsule
Chemistry:
Hydrophilic Polyethersulfone
Support Material:
Polypropylene