Product Images
Viresolve Pro Modus 1.1 device
Description:
Viresolve Pro Modus 1.1 device
Trade Name:
Viresolve
Qty/Pk:
1
Key Applications:
Scale studies/Pilot
Maximum Inlet Pressure (psig):
60
Filtration Area, m²:
0.017
TOC/Conductivity:
After a controlled water flush of 50 L/m², samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645>.
Materials of Construction:
Membrane: Polyethersulfone (PES); Gaskets: Silicone; Housing: Polyvinylidene fluoride (PVDF)
Width, cm (in):
9.22 (3.63)
Good Manufacturing Practices:
This product was manufactured in a facility which adheres to Good Manufacturing Practices.
European Pressure Equipment Directive:
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Product Name:
Viresolve Pro Modus 1.1 device
Non-Fiber Releasing:
This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Connections, Inlet/Outlet:
Inlet/outlet: 3/4" sanitary TC fittings
Length, cm (in):
18.62 (7.33)
Connections, Vent/Drain:
Integrated vent: 1/4" Hose barb with double O-ring seal
Height, cm (in):
5.92 (2.33)
Device Size (in):
1.1