|
Swinnex® Filter Holders
For 13, 25 and 47 mm disc filters
Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect Swinnex 47 mm with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes.
» More…
|
|
Patch Test Kit
For colorimetric fluid contamination analysis
Monitors particulate contamination rapidly in hydrocarbon-based hydraulic fluids, bulk chemicals, boiler water and lubricating oils. Filter color rating and particle assessment scales correspond to recognized standard contamination levels. Detects significant changes in cleanliness through dependable and sensitive test results. Comes with filters for 100 tests.
» More…
|
|
Fluid Sampling Kits
For liquid sampling through 37 mm monitors
For sampling turbine fuels, water or other liquids through Millipore Contamination Analysis Monitors prior to gravimetric or colorimetric analysis. The stainless sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass through the monitor filter.
» More…
|
|
In-Line Filter Holder
For 47 mm disc filters
Ultraclean liquids or gases in-line by pressure filtration. Open for filter change without disturbing attached plumbing.
» More…
|
|
Fluids Contamination Analysis Kit
Using 47 mm membranes
Conforms to standard contamination test procedures such as ARP-598 (hydraulic fluids), ASTM-D2276 (aviation turbine fuels), and federal standard 791a (lubricants, liquid fuels, and related products). Includes expendable materials for approximately 600 tests.
» More…
|
|
MF Filter Forceps
For safe handling of filter membranes
Handle Millipore membrane filters without damage using highly polished stainless steel forcep blades with beveled, unserrated tips. Sterilize by autoclaving or flame.
» More…
|
|
All-Glass Filter Holder
For 90 mm disc filters
Vacuum filter aqueous, organic or corrosive liquids for particulate contamination analysis. Also recommended for HPLC solvent filtration. Contact Millipore for recommended membranes for filtering organic solvents. Borosilicate glass parts in contact with liquid, with ground glass sealing surfaces.
» More…
|
|
1225 Sampling Manifold
For 25 mm disc filters
Simultaneously vacuum filter 12 samples for rapid retentate or filtrate analysis. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 mL.
» More…
|
|
Hydrosol Stainless Steel Filter Holder
For 47 mm disc filters
Particulate or biological contamination analysis via vacuum filtration. Includes grounding set for use with flammable liquids. Filter holder is not autoclavable with filter in-place.
» More…
|
|
Filter Holder Manifolds
(3-Place PVC and 3-, 6-Place Stainless Steel)
Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation.
» More…
|
