Millipore - AFS-8 230V / 50Hz

Ordering Information

Catalogue Number : ZAFS50080
Qty/Pk : 1

Product Family Information

Product Family Information

	AFS 3D, AFS 8D and AFS 16D Analyzer Feed Systems Equipped with a degasser to remove dissolved gases from the final product water, the AFS 3D, AFS 8D and AFS 16D systems produce up to 16 liters per hour of consistently pure, CLSI CLRW type water from tap water for direct feed to clinical analyzers. » More…

AFS 3D, AFS 8D and AFS 16D Analyzer Feed Systems

Equipped with a degasser to remove dissolved gases from the final product water, the AFS 3D, AFS 8D and AFS 16D systems produce up to 16 liters per hour of consistently pure, CLSI CLRW type water from tap water for direct feed to clinical analyzers.

» More…

Product Images

Product Resources

FAQs

FAQs

What consumables are used for this system? » Answer

PR0GTL0S1 – Progard TL 1 Pak – Pretreats water to improve performance and life of the RO Membrane PR0GTLCS1 – Progard TL1 / Cl auto/clean – Additional feature performs Cl Auto Clean of the RO Membrane PRPK0L0S1 – PrePak L1 Pretreatment – Provides additional pretreatment of the water to the RO Membrane in high flow systems QGARDTL01 – Q-Gard TL1 Polishing Pak – Raises the resistivity of the Product water to >10 Mohms KVGL04NP3 – Opticap Durapore bacteria filter – Filters bacteria in the tubing before the analyzer ZLXUVLPL1 – UV Lamp – Controls buildup of bacteria in the holding tank

The system is in production and says Tank Full on the display, but there is no water coming out of the sample valve. What should be done? » Answer

Please check the Millipak or Biopak filter to see if it needs to be vented. If it is vented or no water is flowing into the final filter, please call Lab Water Tech Service.

Where is the Millex filter? » Answer

The Millex is the round disc shape filter located on the clear tubing attached to the aerator pump.

There is a red alarm displaying on my system. Should I call the CCE directly to set up a service appointment? » Answer

To set up a service call, call into Lab Water Technical Support first.

What resistivity should be displayed for the system to be considered within specification? » Answer

The resistivity should always be 10MegOhm or greater.

How many cfu's of bacteria are acceptable after sampling is done? » Answer

The maximum colony count is less than or equal to 10cfu's.

Where is the screen filter? » Answer

The screen filter is located in the 1/2" FNPT fitting assembly the is connected to the feed water valve.

What consumables are used for this system? » Answer

CP2ALLRES – Q GARD A PRPK00001 – PREPAK1 PRETREATMENT PACK 2/BOX PR0G00003 – PROGARD 3 PRETREATMENT PACK CDUFBC001 – BIOPAK C CPAFSARKT MILLEX & TUBING FOR AERATION PUMP CPAFSARKT – MILLEX & TUBING FOR AERATION PUMP

Collapse » View All »

References

References

Waterline Club: Reference - The Production of High-Purity Water in the Clinical Laboratory
Stewart BM (2000) Laboratory Medicine.31:605-611

Technical Literature

Technical Literature

Waterline Club: Application Note - Water for Clinical Chemistry

Product Support

Custom Services Quote
Bulk Services Quote
Technical Service
Customer Service