Ordering Information
Opticap Autoclavable XLT Capsule Filter
Description:
Opticap Autoclavable XLT20 Millipore Express SHC 0.5+0.2 µm 5/8 in. HB
Trade Name:
Opticap
Key Applications:
Laboratory Filtration
Connections, Inlet/Outlet:
16 mm (5/8 in.) Hose Barb
Length, cm (in):
62.5 (24.6)
Connections, Vent/Drain:
1/4 in. Hose Barb with double O-ring seal
Capsule Type:
Liquid
Configuration:
Capsule Filter
Filter Material:
Hydrophilic Polyethersulfone
Filter Brand Name:
Millipore Express
Maximum Inlet Pressure, bar (psi):
6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 23 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
Filtration Area, m2:
0.98
Maximum Differential Pressure, bar (psid):
Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
Diameter, cm (in):
10.7 (4.2)
Oxidizable Substances:
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≤4 L
Bubble Point at 23 °C:
≥4000 mbar (58 psig) air with water
Cartridge Nominal Length, in (cm):
20 (50)
Filter Pore Size, µm:
0.5 + 0.2
Support Material:
Polypropylene
Wettability:
Hydrophilic
Inlet to Outlet Width, cm (in):
19.8 (7.8)
Packaging:
Double Easy-Open bag
Sterilization:
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Housing:
Polypropylene
Vent Cap Material:
Polypropylene
Nominal Pore Size, µm:
0.5/0.2
Bacterial Retention:
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Seal Material:
Silicone
Air Diffusion at 23 °C:
≤56.3 mL/min @ 2.75 bar (40 psig) in water
Filtration Area, cm2:
9800
Sterility:
Non-Sterile
Bacterial Endotoxins:
<0.25 EU/mL as determined by the LAL test per 10 inch cartridge
Device Material:
Polypropylene/Polysulfone