Millipore - Gasliner Cartridge Housings

Description

The Gasliner 316L stainless steel filter housings are designed for all applications where gas stream needs to be sterilised.

This range has been developed to insure a safe protection of both the product and the environment in critical fermentation processes. The features have been optimized to increase sterility assurance, while maintaining a low pressure drop for economy.

A Certificate of Quality (type 2.2 according to EN10204) is provided with the product to confirm components conformity and list QA lot release criteria.

Versatility

These housings are available with all types of inlet/outlet connections, complying to European standards, to directly fit on all types of tanks.

Fully designed for practicality of in situ integrity testing of hydrophobic filters (HydroCorr Test).

Safety

The bayonet style (code 7) connection assures a secure lock of the cartridge in the housing base in case of reverse pressure.

An extensive validation study was conducted to qualify the product design. This consisted of testing pressure rating, corrosion resistance, cleanability and steamability.

Economy

These housings have been developed using a wind tunnel to minimize pressure drop; this allows reduced filtration system cost and lower operating expenses.

Cartridges Used

One 5", 10", 20", 30" or 40" cartridge filter, Code 7 (2-226 O-rings with locking tabs and spear)

Specifications (return to top)

Materials of Construction
Housing	316L stainless steel
Seals	Silicone (meets the FDA requirements cited in 21 CFR 177.2600)
Surface Finish
Interior Surfaces	Electropolished, Ra <0.8 µm
Exterior Surfaces	Electropolished
Connections
Inlet/Outlet	Sanitary TC, DIN, SMS, flange or Weld Tube
Cartridge	Code 7 (2-226) O-rings w/locking-tabs and spear
Dome to Base	4 in. Sanitary Gasket
Maximum Operating Conditions	10 (145) with both gas and liquid. The housing design is calculated to withstand more stringent conditions
Mounting	Can be supported by braced rigid tubing connections
Sterilization	In-line steam sterilizable at 121 °C to 145 °C

Compare	Catalogue No.	Description	Connections, Inlet/Outlet
	EGS51FTFT	Gasliner 1 x 5 in. Cartridge Housing Code 7 2 in. TC	2 in. Sanitary Flange	» Add to Cart
	EGS51NDND	Gasliner 1 x 5 in. Cartridge Housing Code 7 DIN50	DIN DN50	» Add to Cart
	EGS51NFNF	Gasliner 1 x 5 in. Cartridge Housing Code 7 Flange DN50	50 mm Flange	» Add to Cart
	EGS51NWNW	Gasliner 1 x 5 in. Cartridge Housing Code 7 Weld Tube 51	Weld Tube 50 mm	» Add to Cart

Compare	Catalogue No.	Description	Connections, Inlet/Outlet
	EGS11FTFT	Gasliner 1 x 10 in. Cartridge Housing Code 7 2 in. TC	2 in. Sanitary Flange	» Add to Cart
	EGS11NDND	Gasliner 1 x 10 in. Cartridge Housing Code 7 DIN50	DIN DN50	» Add to Cart
	EGS11NFNF	Gasliner 1 x 10 in. Cartridge Housing Code 7 Flange DN50	50 mm Flange	» Add to Cart
	EGS11NWNW	Gasliner 1 x 10 in. Cartridge Housing Code 7 Weld Tube 51	Weld Tube 50 mm	» Add to Cart

Compare	Catalogue No.	Description	Connections, Inlet/Outlet
	EGS21FTFT	Gasliner 1 x 20 in. Cartridge Housing Code 7 2 in. TC	2 in. Sanitary Flange	» Add to Cart
	EGS21NDND	Gasliner 1 x 20 in. Cartridge Housing Code 7 DIN50	DIN DN50	» Add to Cart
	EGS21NFNF	Gasliner 1 x 20 in. Cartridge Housing Code 7 Flange DN50	50 mm Flange	» Add to Cart
	EGS21NWNW	Gasliner 1 x 20 in. Cartridge Housing Code 7 Weld Tube 51	Weld Tube 50 mm	» Add to Cart

Compare	Catalogue No.	Description	Connections, Inlet/Outlet
	EGS31NDND	Gasliner 1 x 30 in. Cartridge Housing Code 7 DIN50	DIN DN50	» Add to Cart
	EGS31NFNF	Gasliner 1 x 30 in. Cartridge Housing Code 7 Flange DN50	50 mm Flange	» Add to Cart

Compare	Catalogue No.	Description	Connections, Inlet/Outlet
	EGS41FTFT	Gasliner 1 x 40 in. Cartridge Housing Code 7 2 in. TC	2 in. Sanitary Flange	» Add to Cart
	EGS41NDND	Gasliner 1 x 40 in. Cartridge Housing Code 7 DIN50	DIN DN50	» Add to Cart
	EGS41NFNF	Gasliner 1 x 40 in. Cartridge Housing Code 7 Flange DN50	50 mm Flange	» Add to Cart
	EGS41NWNW	Gasliner 1 x 40 in. Cartridge Housing Code 7 Weld Tube 51	Weld Tube 50 mm	» Add to Cart

Related Products (return to top)

		Sterilizing¬Grade Aervent Cartridge Filters The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent membrane contributes to clean processes due its non-fiber releasing properties. » Learn More...

		Durapore 0.22 µm Hydrophobic Cartridge Filters Reliable filters for the sterile filtration of gases and liquids » Learn More...

		Aerex 2 0.2 µm Hydrophobic Cartridge Filters Aerex 2 hydrophobic cartridge filters provide high flow rates at low pressure differentials. Aerex 2 cartridge filters are manufactured using PTFE membrane and are 100 % integrity tested to assure optimal sterilizing performance. Each filter lot also must pass rigorous stress testing before release. » Learn More...