Polygard®-CN Cartridge Filters

Description

Polygard®-CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard®-CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard®-CN cartridge filters provide high throughput with minimal differential pressure. Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications

Polygard®-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance

Polygard®-CN filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO® 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each filter is marked with identifying characteristics.

Multiple Formats Available

A full range of filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

Specifications

	Per 10-inch Cartridge
Filtration Area, m²	0.42
Materials of Construction
Filter media	Polypropylene
Structural components	Polypropylene
O-ring	Ethylene Propylene
Maximum Differential Pressure, bar (psid)	4.8 (70) @ 25 °C
Gravimetric Extractables	≤50 mg after 24-h soak in water
Bacterial Endotoxins	Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Oxidizable Substances	Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Sterilization	10 autoclave cycles or SIP @ 126 °C for 30 min
Sanitization	30 min with hot water @ 80 °C
Component Material Toxicity	Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction.
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.

Typical Clean Water Flow Rate vs Pressure Drop

Cartridge Legends Refer to Pore Size (nominal):
CN03 = 0.3 µm
CN06 = 0.6 µm
CN12 = 1.2 µm
CN25 = 2.5 µm
CN50 = 5.0 µm

10-inch Cartridge Filter with Polygard-CN Media

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CN0301E06	0.3	10 (25)
	CN0302E06	0.3	20 (50)
	CN0303E06	0.3	30 (75)
	CN0304E06	0.3	40 (100)
	CN0601E06	0.6	10 (25)
	CN0602E06	0.6	20 (50)
	CN0603E06	0.6	30 (75)
	CN0604E06	0.6	40 (100)
	CN1201E06	1.2	10 (25)
	CN1202E06	1.2	20 (50)
	CN1203E06	1.2	30 (75)
	CN1204E06	1.2	40 (100)
	CN2501E06	30.0	10 (25)
	CN2502E06	30.0	20 (50)
	CN2503E06	30.0	30 (75)
	CN2504E06	30.0	40 (100)
	CN5001E06	5.0	10 (25)
	CN5002E06	5.0	20 (50)
	CN5003E06	5.0	30 (75)
	CN5004E06	5.0	40 (100)
	CN1H01E06	10.0	10 (25)
	CN1H02E06	10.0	20 (50)
	CN1H03E06	10.0	30 (75)
	CN1H04E06	10.0	40 (100)
	CN3H01E06	30.0	10 (25)
	CN3H02E06	30.0	20 (50)
	CN3H03E06	30.0	30 (75)
	CN3H04E06	30.0	40 (100)

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CN0351E06	0.3	10 (25)
	CN0352E06	0.3	20 (50)
	CN0353E06	0.3	30 (75)
	CN0354E06	0.3	40 (100)
	CN0651E06	0.6	10 (25)
	CN0652E06	0.6	20 (50)
	CN0653E06	0.6	30 (75)
	CN0654E06	0.6	40 (100)
	CN1251E06	1.2	10 (25)
	CN1252E06	1.2	20 (50)
	CN1253E06	1.2	30 (75)
	CN1254E06	1.2	40 (100)
	CN2551E06	30.0	10 (25)
	CN2552E06	30.0	20 (50)
	CN2553E06	30.0	30 (75)
	CN2554E06	30.0	40 (100)
	CN5051E06	5.0	10 (25)
	CN5052E06	5.0	20 (50)
	CN5053E06	5.0	30 (75)
	CN5054E06	5.0	40 (100)
	CN1H51E06	10.0	10 (25)
	CN1H52E06	10.0	20 (50)
	CN1H53E06	10.0	30 (75)
	CN1H54E06	10.0	40 (100)
	CN3H51E06	30.0	10 (25)
	CN3H52E06	30.0	20 (50)
	CN3H53E06	30.0	30 (75)
	CN3H54E06	30.0	40 (100)

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CN0371E06	0.3	10 (25)
	CN0372E06	0.3	20 (50)
	CN0373E06	0.3	30 (75)
	CN0374E06	0.3	40 (100)
	CN0671E06	0.6	10 (25)
	CN0672E06	0.6	20 (50)
	CN0673E06	0.6	30 (75)
	CN0674E06	0.6	40 (100)
	CN1271E06	1.2	10 (25)
	CN1272E06	1.2	20 (50)
	CN1273E06	1.2	30 (75)
	CN1274E06	1.2	40 (100)
	CN2571E06	30.0	10 (25)
	CN2572E06	30.0	20 (50)
	CN2573E06	30.0	30 (75)
	CN2574E06	30.0	40 (100)
	CN5071E06	5.0	10 (25)
	CN5072E06	5.0	20 (50)
	CN5073E06	5.0	30 (75)
	CN5074E06	5.0	40 (100)
	CN1H71E06	10.0	10 (25)
	CN1H72E06	10.0	20 (50)
	CN1H73E06	10.0	30 (75)
	CN1H74E06	10.0	40 (100)
	CN3H71E06	30.0	10 (25)
	CN3H72E06	30.0	20 (50)
	CN3H73E06	30.0	30 (75)
	CN3H74E06	30.0	40 (100)

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CN03F1E06	0.3	10 (25)
	CN03F2E06	0.3	20 (50)
	CN03F3E06	0.3	30 (75)
	CN03F4E06	0.3	40 (100)
	CN06F1E06	0.6	10 (25)
	CN06F2E06	0.6	20 (50)
	CN06F3E06	0.6	30 (75)
	CN06F4E06	0.6	40 (100)
	CN12F1E06	1.2	10 (25)
	CN12F2E06	1.2	20 (50)
	CN12F3E06	1.2	30 (75)
	CN12F4E06	1.2	40 (100)
	CN25F1E06	30.0	10 (25)
	CN25F2E06	30.0	20 (50)
	CN25F3E06	30.0	30 (75)
	CN25F4E06	30.0	40 (100)
	CN50F1E06	5.0	10 (25)
	CN50F2E06	5.0	20 (50)
	CN50F3E06	5.0	30 (75)
	CN50F4E06	5.0	40 (100)
	CN1HF1E06	10.0	10 (25)
	CN1HF2E06	10.0	20 (50)
	CN1HF3E06	10.0	30 (75)
	CN1HF4E06	10.0	40 (100)
	CN3HF1E06	30.0	10 (25)
	CN3HF2E06	30.0	20 (50)
	CN3HF3E06	30.0	30 (75)
	CN3HF4E06	30.0	40 (100)

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CN03M4E06	0.3	4 (10)
	CN06M4E06	0.6	4 (10)
	CN12M4E06	1.2	4 (10)
	CN25M4E06	30.0	4 (10)
	CN50M4E06	5.0	4 (10)
	CN1HM4E06	10.0	4 (10)
	CN3HM4E06	30.0	4 (10)

Related Products

		Opticap XL Disposable Capsule Filters with Polygard-CN Media Polygard®-CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard-CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Opticap XL capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. » Learn More...

		OptiScale Capsule Filters for Clarification and Prefiltration Applications OptiScale capsules are a family of convenient, disposable filters ideal for media selection, process screening and scaling. These “drop-in” filter devices, with a variety of media options, create an effective platform for rapidly evaluating biopharmaceuticals. OptiScale offers speed-to-market strategies for efficiently developing compounds and biotherapeutics. » Learn More...