Pellicon Mini Cassette Holder
The Pellicon Mini holder operates one to three Pellicon 2
Mini cassettes in parallel for total areas of 0.1 to 0.3 m2 (1.1 –
3.3 ft2) or Pellicon 3 cassettes (88 cm2 and 0.11
m2) for a total area of 88 cm2 to 0.55 m2.
This sanitary holder is tightened with a small torque wrench to compress the
cassettes between a manifold plate that conveys fluids in and out of the
cassettes and an end plate that seals the cassettes together.
The
Mini holder is designed for process development and small volume pharmaceutical
manufacturing.
| Specifications | |
| Materials of Construction | |
| Manifold and End Plates: | 316L stainless steel |
| Base, Tie Rods, Spacers and Washers: | 304 stainless steel |
| Feet: | Thermoplastic rubber |
| Gaskets: | Silicone |
| Nuts: | Silicone bronze |
| Separator Plates | An optional separator plate allows processing simultaneously with up to three 0.1 m²/1.1 ft² cassettes to determine the best molecular weight cut-off in a single study on the same feed material. |
| Connections | All manifold connections are standard ½-inch sanitary clamp type. |
| Operating Parameters | |
| Temperature Range: | 4 to 50 °C. The Mini holder can be autoclaved without filters installed. The cassettes themselves cannot be autoclaved. |
| Maximum Pressure: | 6.8 bar |
| Dimensions | |
| Height: | 260 mm |
| Width: | 114 mm |
| Length: | 140 mm |
| Weight: | 5 kg |
| Holder Manifold Volume | |
| Feed plus retentate: | 5.3 mL |
| Permeate: | 6.4 mL |
Related Products |
|||||||||||||
|
|||||||||||||
Millipore Support
Customer Service
Worldwide Offices
Suggestions & Feedback