Content Loading...
Content Loading...
Your Cart

0 Items

Favorites

0 Items

Last Item Added: 0 Items
Content Loading...
» Close

Optiseal–M Cartridge Filters with Hydrophobic Aervent Membrane

Description

Optiseal-M filters with Aervent membrane are 0.2 µm hydrophobic cartridges. They are designed for sterilizing applications, removing particles and microorganisms from gases and solvents. They are made with PTFE membrane and polypropylene components for broad application compatibility. Optiseal-M filters with Aervent membrane are designed to be used with Millidisk housings.

Each unit is 100% integrity tested during manufacturing to guarantee integrity.

Typical Applications

    The sterilizing grade rating is based on ASTM liquid bacterial retention challenge. In gases this filter will remove contamination down to 0.01 µm. Optiseal-M Aervent hydrophobic cartridges will remove particles and microorganisms from gases and liquids for low flow rates.
       • Sterile tank venting
       • Fermentation air applications
       • Bioreactor inlet and outlet filtration
       • Autoclaves
       • Sterile process gases
    Cartridges will also sterilize alcohol streams.

Specifications (return to top)

Materials of Construction
FilterHydrophobic PTFE
SupportsPolypropylene
O-ringSilicone
ConnectionsCode M (2-118) O-rings
Filtration Area, m20.05
Maximum Differential Pressure, bar (psid)Forward: 5.5 (80) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 135 °C. Reverse: 4.1 (60)
Bacterial RetentionQuantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology
Bacterial Endotoxins<0.5 EU/mL as determined by the LAL test
ToxicityComponent materials meet the requirements of the USP Class VI Biological Test for Plastics. The cartridges also meet the requirements of the USP General (Mouse) Safety Test.
Sterilization80 (40 forward/40 reverse) SIP cycles of 30 min @ 135 °C
Integrity Test
Bubble Point≥1100 mbar (16 psig) nitrogen with 70//30 % IPA/water


Ordering Information  (return to top)

Select up to 5 products to compare them side by side

Compare Catalogue No. Product Name Filter Pore Size, µm Qty/Pk  
LAGRM1S02 Optiseal-M Cartridge Filter 0.2 2 » Add to Cart


Related Products  (return to top)
Aervent–50 Disposable Filters with Hydrophobic Aervent Membrane
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility.
» Learn More...
Sterilizing¬Grade Aervent Cartridge Filters
The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent membrane contributes to clean processes due its non-fiber releasing properties.
» Learn More...
Optiseal Cartridge Filters with Hydrophobic Aervent Membrane
Optiseal filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.
» Learn More...
Opticap XL Disposable Capsule Filters with Hydrophobic Aervent Membrane
The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent membrane contributes to clean processes due its non-fiber releasing properties.
» Learn More...
Millidisk Sanitary Cartridge Housings
This Series 2000 cartridge housing line accomodates Millidisk cartridge filters. They are designed to handle the most critical sterile filtration steps for pharmaceutical, biotechnology, and industrial processing applications.
» Learn More...
Millidisk Sanitary Cartridge Housings European Version
Millidisk housings are designed for sterilizing liquids and gases using Millidisk cartridge filters
» Learn More...