Millidisk Sanitary Cartridge Housings European Version

Millidisk Sanitary Cartridge Housings European Version

Description
Millidisk housings are designed for sterilizing liquids and gases. All wetted surfaces are constructed of 316L stainless steel and are electropolished, providing excellent durability and maximum corrosion resistance.

The housing features easy-to-clean vents, drains, and connections, allowing complete sterilization. Vent insulating rings have been added, making sterilization of housings easier and safer. The housings accommodate a double O-ring cartridge configuration, allowing a positive cartridge seal and preventing bacterial and particulate bypass. The Millidisk housing locks the Millidisk cartridge in place when the housing is fully assembled.

For added safety and performance, each housing is pressure tested. A Certificate of Quality (type 2.2 according to EN10204) is provided with the product to confirm components conformity and list QA lot release criteria.


Cartridges Used
One Millidisk 10, 20, 30, or 40 stacked disk filter


Dimensions

Housing Type, Connections Inlet to Outlet, cm (in) Length, cm (in) Weight, kg (lb) In-line Housings - 10-stacks 1-1/2 in. Sanitary Flange 12.5 (5) 12.7 (5) 1.6 (3.5) NAUE DN40 15 (5.9) 15 (5.9) 1.6 (3.5) DIN DN40 16 (6.3) 16 (6.3) 1.6 (3.5) Weld tube DN40 12.5 (5) 12.7 (5) 1.6 (3.5) In-line Housings - 40-stacks 1-1/2 in. Sanitary Flange 20 (7.9) 20 (7.9) 1.8 (4) NAUE DN40 22.6 (8.9) 22.6 (8.9) 1.8 (4) DIN DN40 23.6 (9.3) 23.6 (9.3) 1.8 (4) Weld tube DN40 20 (7.9) 20 (7.9) 1.8 (4) T-line Housings - 10-stacks 3/4 in. Sanitary Flange 20.6 (8.1) 19.3 (7.6) 2.7 (6) 1-1/2 in. Sanitary Flange 20.6 (8.1) 19.3 (7.6) 2.7 (6) NAUE DN15 20.6 (8.1) 19.3 (7.6) 2.7 (6) DIN DN15 20.6 (8.1) 19.3 (7.6) 2.7 (6) Weld tube DN15 18 (7.1) 19.3 (7.6) 2.7 (6) T-line Housings - 40-stacks 3/4 in. Sanitary Flange 20.6 (8.1) 26.9 (10.6) 2.9 (6.4) 1-1/2 in. Sanitary Flange 20.6 (8.1) 26.9 (10.6) 2.9 (6.4) NAUE DN15 20.6 (8.1) 26.9 (10.6) 2.9 (6.4) DIN DN15 20.6 (8.1) 26.9 (10.6) 2.9 (6.4) Weld tube DN15 18 (7.1) 26.9 (10.6) 2.9 (6.4)

Specifications    (return to top)

Materials of Construction Housing; Clamp Housing - 316L stainless steel; Clamp - 304 stainless steel Seals Silicone (meet the FDA requirements cited in 21 CFR 177.2600) Vent Insulators EPDM Surface Finish Wetted Surfaces Polished and electropolished; mirror finish; Ra<0.5 µm Exterior Surfaces Polished and electropolished Connections Inlet/Outlet Sanitary TC, BSP, DIN, NAUE or Weld Tube Vent/Drain 1/4 in. Hose Barb Cartridge Code M (2-118) O-rings Dome to Base 3 in. TC Gasket Maximum Operating Pressure, bar (psi) 10 (145) Mounting Can be supported by braced rigid tubing connections Sterilization In-line steam sterilizable at 121 °C to 145 °C