Optiseal Sanitary Cartridge Housings European Version

Click below for more information:
Specifications
Ordering Information
Related Products

Description

The Optiseal housing is designed for sterile filtration of aqueous solutions and gases using Optiseal cartridge filters. All wetted surfaces are constructed of 316L stainless steel and are electropolished, providing excellent durability and maximum corrosion resistance.

The housing features easy-to-clean vents, drains, and connections for complete sterilization. Vent-insulating rings are included for added safety. The housing accommodates a double O-ring cartridge configuration, allowing a positive cartridge seal and preventing bacterial and particulate bypass. The Optiseal housing is designed to engage hold-down tabs on the Optiseal cartridge that lock the cartridge in place when the housing is fully assembled.

A Certificate of Quality (type 2.2 according to EN10204) is provided with the product to confirm components conformity and list QA lot release criteria.

Cartridges Used

All Optiseal cartridge filters

Dimensions

	Inlet to Outlet, cm (in)	Weight, kg (lb)
In-line Housing	20 (7.9)	1.9 (4.2)
T-line Housing	22.9 (9)	3 (6.6)

Specifications (return to top)

Materials of Construction
Housing; Clamp	316L stainless steel housing; 304 stainless steel clamp
Seals	Silicone (meets the FDA requirements cited in 21 CFR 177.2600)
Vent Insulators	EPDM
Surface Finish
Wetted Surfaces	Mechanical polish and electropolished, Ra <0.5 µm
Exterior Surfaces	Mechanical and electropolished
Connections
Inlet/Outlet	3/4" or 1 1/2" TC flange
Vent/Drain	1/4 in. Hose Barb
Cartridge	Double O-rings (2-123) with hold-down tabs
Dome to Base	3 in. Sanitary Gasket
Maximum Operating Conditions, bar (psi)	6 (87) to 10 (145) depending on configuration @ 110 °C
Mounting	Can be supported by braced rigid tubing connections
Sterilization	In-line steam sterilizable at 121 °C to 145 °C

Ordering Information (return to top)

Select up to 5 products to compare them side by side

In-line Housings

Compare	Catalogue No.	Connections, Inlet/Outlet
	E0SI4SPET	1-1/2 in. Sanitary Flange	» Add to Cart
	E0SI400CT	3/4 in. Sanitary Flange	» Add to Cart
	E0SI400ET	1-1/2 in. Sanitary Flange	» Add to Cart

T-line Housings

Compare	Catalogue No.	Connections, Inlet/Outlet
	E0ST400CT	3/4 in. Sanitary Flange	» Add to Cart
	E0ST400ET	1-1/2 in. Sanitary Flange	» Add to Cart

Related Products (return to top)

Optiseal Cartridge Filters with 0.45 µm Hydrophilic Durapore Membrane

Optiseal cartridge filters feature a revolutionary cartridge-to-housing sealing mechanism and pleated configuration, resulting in maximum sterility assurance and economical performance. Optiseal filters are designed for pharmaceutical applications, removing particles and microorganisms from liquids and gases. Each unit is 100% integrity tested during manufacturing to assure integrity.
» Learn More...

Optiseal Cartridge Filters with 0.1 µm and 0.22 µm Hydrophilic Durapore Membrane

Optiseal cartridge filters feature a revolutionary cartridge-to-housing sealing mechanism and pleated configuration, resulting in maximum sterility assurance and economical performance. Optiseal filters are designed for sterilizing applications, removing particles and microorganisms from liquids. Each unit is 100% integrity tested during manufacturing to assure integrity.
» Learn More...

Optiseal Cartridge Filters with Hydrophobic Aervent Membrane

Optiseal filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.
» Learn More...

Optiseal Cartridge Filters with 0.22 µm Hydrophobic Durapore Membrane

Reliable filters for the sterile filtration of gases and liquids. Featuring a unique cartridge-to-housing sealing mechanism, these Optiseal Durapore cartridges offer maximum sterility assurance.
» Learn More...

Optiseal Cartridge Filters with Charged Durapore 0.22 µm Membrane

Optiseal hydrophilic cartridge filters with charged Durapore 0.22 µm membrane are sterilizing-grade filters manufactured from polyvinylidene fluoride (PVDF) membrane modified to give it a net positive charge.
» Learn More...