Mobius Disposable Solutions

Related Products  (return to top)

Acerta® DS1 Dispensing System Liquid filling system with disposable module for sterile fill and finish operations » Learn More... Aervent–50 Disposable Filters with Hydrophobic Aervent Membrane Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. » Learn More... Sterilizing-grade Durapore Multimedia Cartridge Filters Durapore® Multimedia filters combine a 0.22 µm hydrophilic Durapore membrane with an upstream Milligard® prefilter media, providing sterility assurance, high flow rates and extended throughputs, low extractables, and broad chemical compatibility. The combination of prefiltration media and final sterilizing membrane in one filter results in process compression and improved economics. » Learn More... Gamma Compatible Sterilizing-grade Durapore® 0.1µm and 0.22 µm Filters Enhanced process efficiency and cost-effectiveness from reduced cleaning and validation requirements » Learn More... Lynx S2S Connector for sterile‑to‑sterile connection Secure connections between sterilized fluid paths » Learn More... Lynx® ST Connectors Enables integration of steamable hard piped process equipment with disposable sterile fluid paths » Learn More... Millidisk Barrier Filter The Millidisk Barrier Filter was developed to facilitate in-line post steam-in-place (SIP), pre-use integrity testing of single and/or redundant liquid filter systems. The unique combination of hydrophilic and hydrophobic sterilizing grade Durapore membrane in one filter unit allows for steam penetration, condensate removal, filter drying, filter wetting and filter integrity testing. » Learn More... Millidisk Cartridge Filters Millidisk cartridge filters are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases. The stacked disc design allows minimal hold-up volume and particle shedding, making Millidisk filters ideally suited for high-value added applications. » Learn More... Millipak Disposable Filter Units Millipak disposable filter units are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases. The stacked disc design allows minimal hold-up volume and particle shedding, making Millipak units ideally suited for high value-added applications. » Learn More... Millistak+® Pod Disposable Depth Filter System Innovative, high performance Pods are ideal for primary and secondary clarification in lab, pilot and process scale applications » Learn More... Millistak+ Mini Capsule Filters The full range of Millistak+ charged depth media is now available in an easy-to-use disposable format. Millistak+ Mini capsule filters for clarification and prefiltration applications ensure the reliable performance that is essential in both small batch processing and scale-up. » Learn More... Opticap Disposable Capsule Filters with Viresolve Prefilter Custom protection for Viresolve NFP viral clearance filters » Learn More... Opticap XL Disposable Capsule Filters with 0.22 µm Hydrophobic Durapore Membrane Reliable filters for the sterile filtration of gases and liquids. Opticap XL capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. » Learn More... OptiScale Capsule Filters for Clarification and Prefiltration Applications OptiScale capsules are a family of convenient, disposable filters ideal for media selection, process screening and scaling. These “drop-in” filter devices, with a variety of media options, create an effective platform for rapidly evaluating biopharmaceuticals. OptiScale offers speed-to-market strategies for efficiently developing compounds and biotherapeutics. » Learn More... Opticap XL Disposable Capsule Filters with 0.45 µm Durapore Membrane Opticap XL 2, 4, 5 and 10 disposable capsule filters with 0.45 µm hydrophilic Durapore membrane are available in multiple filtration areas, providing an optimal choice for every application. Each Opticap XL capsule is integrity tested during the manufacturing process. » Learn More... Opticap XL Disposable Capsule Filters with Clarigard Media Clarigard® filters' 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility. » Learn More... Opticap XL Disposable Capsule Filters with Hydrophobic Aervent Membrane The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent membrane contributes to clean processes due its non-fiber releasing properties. » Learn More... Opticap XL Disposable Capsule Filters with Lifegard Media Superior filters for the clarification and prefiltration of viscous biological fluids when high contaminant holding capacity is required. The unique capsule design with pleated Lifegard media minimizes hold-up volume and reduces production losses. » Learn More... Opticap XL Disposable Capsule Filters with Polygard‑CN Media Polygard®-CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard-CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Opticap XL capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. » Learn More... Opticap XL Disposable Capsule Filters with Polygard‑CR Media Polygard®-CR products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard-CR filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility. » Learn More... Opticap XL and XLT Disposable Capsule Filters with 0.1 µm and 0.22 µm Hydrophilic Durapore Membrane A trusted name in the industry for over 25 years, Durapore® sterilizing-grade 0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high flow rates and throughputs. The Durapore membrane contributes to clean processes due to low extractables, broad chemical compatibility, and its non-fiber releasing properties. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Milligard Media Opticap XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. The capsule patented design allows unparalleled thermal and hydraulic stress resistance, resulting in reliability, high confidence in the sterility process and improved cleanliness. The unique capsule design with pleated Milligard membrane minimizes hold-up volume and reduces production losses. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Millipore Express® SHC Hydrophilic Membrane Millipore Express SHC (Sterilizing grade High Capacity) devices offer high performance and superior economics in a wide variety of sterilizing grade filtration applications. Millipore Express SHC filters are designed for use across a range of low to high-fouling process solutions. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Millipore Express® SHF Hydrophilic Membrane Sterilizing-grade PES membrane for fast, efficient, economical buffer filtration. Opticap XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Multilayer Durapore 0.45/0.22 µm Sterilizing grade, hydrophilic Multilayer Durapore 0.45/0.22 µm filters maximize process efficiency by providing high product recovery and extended throughput with low pressure drops. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Polysep II Media The Polysep™ II media consists of a borosilicate glass layer and a layer of mixed esters of cellulose membrane. The depth of the microfiber filter layer provides high particle loading capacity, and retention of large particulates while maintaining high flow rates. The mixed cellulose ester membrane layer provides the high retention needed during critical prefiltration steps while protecting more expensive downstream filtration devices and equipment. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Viresolve NFP Membrane Viresolve NFP filters with Viresolve NFP (Normal Flow Parvovirus) membranes clear parvovirus from recombinant or human plasma sources, without compromising flow rates. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Viresolve NFR Membrane Viresolve NFR filters with Retropore® membrane quickly and efficiently remove retroviruses from recombinant protein solutions or human plasma sources. » Learn More... Pellicon XL 50 Microfiltration Devices The Pellicon XL 50 cassette couples Millipore's superior microfiltration membranes with the first truly linearly scalable TFF device for processing small volumes. The Durapore membrane offers ultra-low protein binding and excellent retention performance, which assures reliable and consistent performance. » Learn More... Pellicon XL 50 Ultrafiltration Devices True linear scalability with UF membranes with the same flow path and channel height as larger Pellicon 2 cassettes. The Pellicon XL 50 allows process development and scaling studies. » Learn More... Sterile Opticap Disposable Capsules with Hydrophilic Durapore Membrane Sterile Opticap capsule filters are fully contained capsule filters with Durapore 0.22 µm or 0.1 µm hydrophilic PVDF membrane. The filters are sterilized by gamma irradiation prior to shipment, eliminating the need for autoclaving prior to use. Each sterile Opticap filter is labeled with its catalogue number, lot number, serial number, and pore size. » Learn More... Viresolve Prefilter Pod Disposable Devices Custom protection for Viresolve NFP viral clearance filters » Learn More... OptiScale Capsule Filters for Aseptic Processing Applications OptiScale capsules, with a large variety of filtration media options, are a family of convenient, disposable filters ideal for media selection, process screening and scaling. » Learn More... OptiScale-25 Capsules with Viresolve NFP Membrane Viresolve NFP filters with Viresolve NFP (Normal Flow Parvovirus) membranes clear parvovirus from recombinant or human plasma sources, without compromising flow rates. » Learn More... OptiScale‑25 Capsules with Viresolve NFR Membrane Viresolve NFR filters with Retropore® membrane quickly and efficiently remove retroviruses from recombinant protein solutions or human plasma sources. » Learn More... OptiScale-40 with Viresolve Prefilter These small devices are useful for process development and optimization, and viral clearance studies » Learn More... Opticap Disposable Capsule Filters with Millistak+ CE Media Available media series satisfy most applications needs in the biopharmaceutical market where high concentrations of colloidal contaminant dictate the need for high surface area depth media with a positive charge. The CE series is suitable for coarse filtration in the 1 to 30 micron range. » Learn More... Opticap Disposable Capsule Filters with Millistak+ DE Media Millistak+ DE capsules are clarification/prefiltration filters that have been specifically developed to meet the critical needs of the pharmaceutical and biotechnology industries. The Millistak+ DE stacked devices satisfy application needs in the bio-pharmaceutical market where high concentrations of colloidal contaminants dictate the need for high surface area depth media with a positive charge. » Learn More... Opticap Disposable Capsule Filters with Millistak+ HC Media Millistak+ HC filters combine two distinct separation technologies to enhance filter capacity and retention - charged depth media (DE grade) and membrane (RW01). Designed for removing whole cells or colloidal particulates in mammalian cell culture applications, Millistak+ HC Opticap filters compress multiple stages of downstream bioreactor processes into one efficient step. Opticap capsules are self contained, disposable capsules for scale-up and small batch processing. » Learn More... Opticap XL and XLT Disposable Capsule Filters with Millipore Express® SHR Hydrophilic Membrane Millipore Express SHR (Sterile High-Retention) devices provide sterilizing-grade performance and mycoplasma removal across a range of bioprocess solutions. » Learn More...