Sanitary Sampling Valves

Description

For sterile sampling of water or other final products in the beverage industry.

Collect samples mid-stream and filter through a MicropreSure unit, or sample into sterile sampling bags or a graduated cylinder
Keep in sanitary condition for immediate sampling with alcohol or hydrogen peroxide injections
Variety of connections

Specifications

Materials
Stem & body: 316L stainless steel or ECTFE body in ECTFE-type units; Valve cap: ABS or polypropylene; O-ring & plug seal: silicone - or fluoroelastomer (meets the FDA indirect Food requirements cited in Code of Federal Regulations CFR 21, Part 177-182)
Valve Pressure (max)
Up to 7 bar (100 psi) @ 25 °C
Steam sterilization
10 min @ 135 °C
Connections
Male Luer-slip outlet; 1/4 in. or 1/8 in. NPTM or 1-1/2 in. TC probe

Ordering Information

Valves | Spare parts

Select up to 5 products to compare them side by side

Valves

Top »

Compare	Catalogue No.	Description
	MXPESPWEL	Sanitary Sampling Valve 316L Stainless Steel 1/4 in. weld end
	YY20040H0	ESP valve 1/4" NPTM HALAR
	MXPESPTCL	MicropreSure Sanitary Sampling Valve 316L Stainless Steel 1-1/2 in. TC
	MXPESP14N	MicropreSure Sanitary Sampling Valve 316L Stainless Steel 1/4 in. NPT
	MXPESP18N	MicropreSure Sanitary Sampling Valve 316L Stainless Steel 1/8 in. NPT

Each YY20040H0 valve is fitted with fluoroelastomer O-ring and plug seal, and polypropylene valve cap.
Each MXPESPWEL; MXPESP14N; MXPESP18N or MXPESPTCL valve is fitted with silicone O-ring and plug seal, and ABS valve cap.

Spare parts