Stainless Steel Filter Holders

Use to ultraclean or sterilize small volumes via gas pressure filtration through suitable membrane supported on holder base.

Replacement Parts
1	Top Cap with hose adapter
3	Locking Ring Gasket, PTFE
4	O-rings, PTFE
5	Filter Support Screen, stainless steel, 47 mm
8	No. 8 stopper, 9.5 mm (3/8 in.) hole, silicone

For batch-filtration of 100 or 340 mL by applying air pressure to inlet

Materials	Stainless steel barrel, base, filter support screen, top cap, and tubing adapter; anodized aluminum locking ring; silicone stopper
Filter Diameter (mm)	47
Filtration Area, cm²	11.3
Prefilter Diameter, mm	42 (thick depth prefilter) or 47 (membrane prefilter)
Maximum Inlet Pressure, bar (psi)	6.9 (100)
Fittings
Inlet	9.5 mm (3/8 in.) hose connector
Outlet	No. 8 perforated silicone stopper mounts in standard 1 L filtering flask
Dimensions
Height, cm (100 mL holder)	29.2
Height, cm (340 mL holder)	53.3
Diameter, cm	7

Compare	Catalogue No.	Description	Qty/Pk
	XX4004700	Stainless Steel Pressure Filter Holder, 47 mm, 100 mL	1
	XX4004740	Stainless Steel Pressure Filter Holder, 47 mm, 340 mL	1

Compare	Catalogue No.	Description	Components	Qty/Pk
	000205	Top Cap with hose adapter		1
	XX4004714	Locking Ring Gasket, PTFE		5
	XX4004716	O-rings, PTFE		5
	XX4004704	Filter Support Screen, stainless steel, 47 mm		1
	XX2004703	Gasket, PTFE		25
	XX2004718	No. 8 stopper, 9.5 mm (3/8 in.) hole, silicone		5
	XX40047RK	Replacement Parts Kit, 47 mm holder	includes 5 each top cap O-rings, locking ring gasket, filter sealing O-ring and screen gasket	1

Compare	Catalogue No.	Description	Qty/Pk
	XX1004705	Vacuum filtering flask, 1 L	1
	XX1004744	Vaccum filtering flask, 4 L	1
	XX7100004	Tubing, 3/16 in. ID x 140 cm, silicone	1
	XX6700034	3 meters PVC tubing with 9.5 mm internal diameter	1

We want to hear from you. Contact a specific department below or click "Suggestions and Feedback" to send your comments.