Fluid Sampling Kits

Fluid Sampling Kits For liquid sampling through 37 mm monitors

Applications
For sampling turbine fuels, water or other liquids through Millipore Contamination Analysis Monitors prior to gravimetric or colorimetric analysis.

The stainless sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass through the monitor. A valved syringe serves as a pump to remove residual liquid from the monitor.

For gravimetric analysis, accessory Matched-Weight Monitors eliminate filter pre-weighing before sampling. For details, see Aerosol Analysis Monitors.


Specifications    (return to top)

Materials Stainless steel with stainless-clad PTFE hose; polystyrene monitors Fittings Quick-release valve and plug with 1/8" NPTF thread and Viton®-A seals; matching nipple on sampling hose Maximum Pressure, bar (psi) 6.9 (100) Dimensions Length, cm 36.8 Height, cm 12.5 Width, cm 23.5 Shipping Weight, kg (lb) 4.5 (9.9) Warning: For filtering flammables with the Fluid Sampling Kit, properly ground the unit and secure all grounding connections.