Bevigard-M Cartridge Filters

Description

Used in final stage prefiltration applications, these versatile surface-type products retain contaminant on the mixed cellulose esters membrane.

Used as final filter for bioburden reduction, they offer an excellent efficiency of microorganism removal. Because of their structure, Bevigard™-M cartridge filters offer the best protection of final sterilizing-grade filters such as Vitipore™ II and Vitipore II Plus, saving money on this critical final step.

Bevigard-M filters can be repeatedly hot water regenerated providing highly cost effective filtration.

They are manufactured in a facility whose Quality Management System is approved by an accredited registering body to the ISO® 9000 Quality Systems Standard.

Typical Applications

Bevigard-M cartridge filters are designed for beverage prefiltration applications or final filtration stages such as sterilizing grade filter protection or bioburden reduction of water, wine or other beverages.

Specifications

	per 10-inch Cartridge
Materials of Construction
Filter	Mixed Cellulose Esters
Structural Components	Polypropylene
Filter Supports	Polyester
O-rings	Silicone
Nominal Pore Size (µm)
W03	0.2
W06	0.5
W19	1.2
Filtration Area, m²	0.8
Maximum Differential Pressure, bar (psid)	3.5 (50) @ 25 °C
Maximum Operating Temperature, °C	80
Sterilization	10 autoclave cycles or SIP @ 121 °C for 30 min
Sanitization	30 min with hot water @ 80 °C
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Device Good Manufacturing Practices.
Non-Fiber Releasing	Component materials meet the "non-fiber releasing" criteria as defined in 21 CFR 210.3 (b) (6).
Component Material Toxicity	Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction.
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.
Certificate of Quality	Each cartridge is shipped with a Certificate of Quality which summarizes our stringent manufacturing and quality standards.

Typical Clean Water Flow Rate vs Pressure Drop

Cartridges with Milligard Media - 30-inch, Cartridge Code 0

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CW0301SB1	0.2	10 (25)
	CW0302SB1	0.2	20 (50)
	CW0303SB1	0.2	30 (75)
	CW0304SB1	0.2	40 (100)
	CW0601SB1	0.5	10 (25)
	CW0602SB1	0.5	20 (50)
	CW0603SB1	0.5	30 (75)
	CW0604SB1	0.5	40 (100)
	CW1901SB1	1.2	10 (25)
	CW1902SB1	1.2	20 (50)
	CW1903SB1	1.2	30 (75)
	CW1904SB1	1.2	40 (100)
	CWSC01SB1	1.2 / 0.5	10 (25)
	CWSC02SB1	1.2 / 0.5	20 (50)
	CWSC03SB1	1.2 / 0.5	30 (75)
	CWSC04SB1	1.2 / 0.5	40 (100)
	CWSS01SB1	0.5 / 0.2	10 (25)
	CWSS02SB1	0.5 / 0.2	20 (50)
	CWSS03SB1	0.5 / 0.2	30 (75)
	CWSS04SB1	0.5 / 0.2	40 (100)

Compare	Catalogue No.	Nominal Pore Size (µm)	Cartridge Nominal Length, in (cm)
	CW0371SB1	0.2	10 (25)
	CW0372SB1	0.2	20 (50)
	CW0373SB1	0.2	30 (75)
	CW0374SB1	0.2	40 (100)
	CW0671SB1	0.5	10 (25)
	CW0672SB1	0.5	20 (50)
	CW0673SB1	0.5	30 (75)
	CW0674SB1	0.5	40 (100)
	CW1971SB1	1.2	10 (25)
	CW1972SB1	1.2	20 (50)
	CW1973SB1	1.2	30 (75)
	CW1974SB1	1.2	40 (100)
	CWSC71SB1	1.2 / 0.5	10 (25)
	CWSC72SB1	1.2 / 0.5	20 (50)
	CWSC73SB1	1.2 / 0.5	30 (75)
	CWSC74SB1	1.2 / 0.5	40 (100)
	CWSS71SB1	0.5 / 0.2	10 (25)
	CWSS72SB1	0.5 / 0.2	20 (50)
	CWSS73SB1	0.5 / 0.2	30 (75)
	CWSS74SB1	0.5 / 0.2	40 (100)

Contact Us