信息读取中...
信息读取中...
购物车

0 项

收藏夹

0 项

最后添加项: 0 项
信息读取中...
» 关闭

Viresolve Prefilter Pod Disposable Devices

Description

The Viresolve Prefilter will improve the filtration economics of the viral clearance step by providing protection for Viresolve NFP viral clearance filters. Use of this prefilter with NFP will improve capacity and increase the life of the NFP filter. Available in scalable filter formats, this prefilter will easily fit in existing development and manufacturing processes.

Enhanced Viral Clearance

    Viresolve NFP filters clear parvovirus from recombinant feed streams without compromising flow rates, adding speed and dependability to viral clearance in therapeutic drug manufacturing applications. These reliable filters are ideal for monoclonal antibody polishing applications eliminating small virus contaminants.

       • Improves NFP capacity reducing overall filtration costs
       • Maintain high product yields
       • Simple, predictable scale-up and scale-down

Increased Capacity and Filter Life

Utilizing this prefilter in series with Viresolve NFP filters (NFP) will allow you to take advantage of NFP’s high flow rates and product yield. The prefilter effectively removes fouling components of the feed, leading to dramatic increases in the performance of the Viresolve NFP filter. This improved capacity significantly reduces the cost of the viral clearance step.

Regulatory Compliance

Viresolve Prefilters are designed, developed, and manufactured in accordance with good manufacturing practices under an ISO® 9001 Quality Management System.
Pods are integrity tested during manufacturing and supported by a Validation Guide to assist in compliance with regulatory requirements. For traceability and easy identification, each filter is labeled with the product name and identifying characteristics. Every filter is shipped with a Certificate of Quality.

Multiple Formats Available

    Viresolve Prefilters are offered in multiple device configurations.
       • OptiScale™-40 small scale disposable capsule filters
       • Opticap™ disposable capsule filters
       • Pod disposable devices

Pod Disposable Devices

Scalable from pilot to process applications, this new innovative NFF device format offers process flexibility and linear scale-up.

Flexible Configurations
This patented technology consists of three Pod sizes and an expandable holder system.
Pod Prefilters are offered in 0.1 m2, 0.5 m2 and 1 m2 filtration areas.
Two basic holders are available; the pilot scale holder is configurable with extension rods that can accommodate up to five 1 m2 Pods, while the process scale holder expands to mount from 5 to 30 Pod devices. The stainless steel holder is not wetted by product and the connectors are disposable plastic. With the compact, modular design of Millipore’s new Pod system, you can increase productivity, shorten cycle-time and reduce costs.

Specifications (return to top)

Filtration Area, m20.11
or0.55
or1.1
Materials of Construction
MediaCellulose fibers w/inorganic filter aid
MembraneMixed Cellulose Esters
HousingGlass-filled polypropylene
Flat sealThermoplastic elastomer
Housing VentDisposable vent
Maximum Inlet Pressure, bar (psi)3.4 (50) @ 23 °C
Maximum Differential Pressure, bar (psi)Forward: 2.1 (30). Reverse: 2.1 (30)
Sterilization3 autoclave cycles of 60 min @ 123 °C
TOC/ConductivityLot release testing on effluent exhibited TOC <4 ppm and conductivity <10 µS/cm after 3 autoclave cycles and a water flush of 100 L/m2
MetalsLot release testing on effluent exhibited the following values:
Pb <0.11 mg/m2
Hg <0.11 mg/m2
As <0.012 mg/m2
Fe <1.1 mg/m2
Al <5.5 mg/m2
Bacterial Endotoxins<0.25 EU/mL as determined by the LAL test
Component Material ToxicityComponent materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.
Quality StandardThese products are manufactured in accordance with a Quality Management System that is approved by an accredited registering body to the appropriate ISO® 9001 Quality Systems Standard


订购信息  回到页首

Select up to 5 products to compare them side by side

比较 目录编号 说明 处理体积，L 连接口，进口/出口 数量/包装  
MSPV01FS1 Pod Viresolve Prefilter, 0.11 m2 20–40 Disposable 1-1/2 in. TC inlet and outlet 1 » 添加到购物车
MSPV05FS1 Pod Viresolve Prefilter, 0.55 m2 100–200 Disposable 1-1/2 in. TC inlet and outlet 1 » 添加到购物车
MSPV10FS1 Pod Viresolve Prefilter, 1.1 m2 200–400 Disposable 1-1/2 in. TC inlet and outlet 1 » 添加到购物车


相关产品  回到页首
OptiScale¬40 with Viresolve Prefilter
These small devices are useful for process development and optimization, and viral clearance studies
» 更多信息...
Opticap Disposable Capsule Filters with Viresolve Prefilter
Custom protection for Viresolve NFP viral clearance filters
» 更多信息...
Pod Filter Holders
» 更多信息...
OptiScale¬25 Capsules with Viresolve NFP Membrane
Viresolve NFP filters with Viresolve NFP (Normal Flow Parvovirus) membranes clear parvovirus from recombinant or human plasma sources, without compromising flow rates.
» 更多信息...
Viresolve NFP Cartridge Filters
Viresolve NFP filters with Viresolve NFP (Normal Flow Parvovirus) membranes clear parvovirus from recombinant or human plasma sources, without compromising flow rates.
» 更多信息...
Opticap XL and XLT Disposable Capsule Filters with Viresolve NFP Membrane
Viresolve NFP filters with Viresolve NFP (Normal Flow Parvovirus) membranes clear parvovirus from recombinant or human plasma sources, without compromising flow rates.
» 更多信息...