> Last Item Added:
0 Items

Filter Holders


Vacuum Filter HoldersPressure Filter Holders

Vacuum Filter Holders - Glass
 
Glass Microanalysis Filter Holders
For 25 mm disc filters
Use to vacuum filter small volumes of liquids for particulate or biological contamination analysis. Filter support is available in fritted glass or stainless steel. Thick prefilters or laminated filters will not seal in this holder. Durapore (PVDF) or unlaminated PTFE are recommended for solvent applications. » Learn More...

All-Glass Filter Holder
For 47 mm disc filters
Vacuum filter aqueous, organic or corrosive liquids for particulate contamination analysis. Also recommended for HPLC solvent filtration.
» Learn More...

Glass Filter Holders
For 47 mm disc filters

With borosilicate glass funnel and base, anodized aluminum spring clamp, silicone stopper, coarse-frit glass filter support and PTFE-faced funnel and base. » Learn More...


All-Glass Filter Holder
For 90 mm disc filters
Vacuum filter aqueous, organic or corrosive liquids for particulate contamination analysis. Also recommended for HPLC solvent filtration. Contact Millipore for recommended membranes for filtering organic solvents. Borosilicate glass parts in contact with liquid, with ground glass sealing surfaces. » Learn More...

MilliSolve™ Filtration System
For solvent/buffer filtration using 47 mm disc filters
The MilliSolve Filtration System features automatic, continuous solvent and buffer filtration-no need to pour during filtration. the 2 L receiving flask includes plug and tubing for storage-eliminates filtered buffer transfer to reduce labor and contamination risk. the conical 2 L flask bottom allows access to all filtered solvent/buffer. » Learn More...
 

< Back to Top

 
Vacuum Filter Holders - Stainless Steel
 
Analytical Stainless Steel Filter Holder
For 13 mm disc filters
Use to vacuum filter small volumes of liquids for precise particulate contamination analysis. » Learn More...

Analytical Filter Holders
For 25 and 47 mm disc filters
Use to vacuum filter liquids for bacteriological or particulate contamination analysis. Filter holders can be autoclaved or flame-sterilized. » Learn More...

Hydrosol Stainless Filter Holder
For 47 mm disc filters
Particulate or biological contamination analysis via vacuum filtration. Includes grounding set for use with flammable liquids. Filter holder is not autoclavablewith filter in-place. » Learn More...

Epifluorescence Stainless Steel Filter Holder
For 13 mm disc filters
Vacuum-filter liquids for bacteriological analysis by epifluorescence technique. » Learn More...

Filter Holder Manifolds
3-Place PVC, 3- and 6-Place Stainless Steel
Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. » Learn More...

Aerosol Filter Holders
For 47 mm disc filters
Vacuum-filter air or other gases from open atmospheres or from closed systems for particulate contamination analysis. » Learn More...
 

< Back to Top

 
Vacuum Filter Holders - Others
 
Aerosol Analysis Monitors
With 25 mm disc filters
Two 25 mm monitor types are available: a 3-piece polystyrene monitor with 16 mm center ring and female Luer slip vacuum connection, and a 3-piece carbon-filled polypropylene conductive monitor with 50 mm extension cowl. » Learn More...

Aerosol Analysis Monitors
With 37 mm disc filters
Pre-assembled with filters in-place. Available with matched-weight membranes. » Learn More...

Fluid Contamination Analysis Monitors
With 37 mm disc filters
Transparent, disposable filter holders made from Tenite plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm2). A thick cellulose pad, 34 mm diameter, between the monitor sections seals the filter to distribute sample flow evenly over the filter surface. » Learn More...

Monitor Refills and Gravimetric Analysis Filters
37 mm and 47 mm disc filters
MF-Millipore MCE and Mitex (PTFE) membranes for 37 mm Contamination Analysis Monitors. Matched-weight filters matched in pairs to within ±0.1 mg for gravimetric analysis. Also available pre-loaded in Contamination Analysis Monitors. » Learn More...

Fluid Sampling Kits
For liquid sampling through 37 mm monitors
For sampling turbine fuels, water or other liquids through Millipore Contamination Analysis Monitors prior to gravimetric or colorimetric analysis. The stainless sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass through the monitor filter. » Learn More...

Fluids Contamination Analysis Kit
Using 47 mm membranes
Conforms to standard contamination test procedures such as ARP-598 (hydraulic fluids), ASTM-D2276 (aviation turbine fuels), and federal standard 791a (lubricants, liquid fuels, and related products). Includes expendable materials for approximately 600 tests. » Learn More...

Patch Test Kit
For colorimetric fluid contamination analysis
Monitors particulate contamination rapidly in hydrocarbon-based hydraulic fluids, bulk chemicals, boiler water and lubricating oils. Filter color rating and particle assessment scales correspond to recognized standard contamination levels. Detects significant changes in cleanliness through dependable and sensitive test results. Comes with filters for 100 tests. » Learn More...

1225 Sampling Manifold
For 25 mm disc filters
Simultaneously vacuum filter 12 samples for rapid retentate or filtrate analysis. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 mL. » Learn More...

Sterifil® Aseptic System and Holder
For 47 mm disc filters
Used for general filtration applications and filtration of samples for particulate or biological contamination analysis. The closed unit protects sample and filtrate from environmental contamination. Sterifil holder and funnel available separately (without receiver flask and cover) to use with standard 1 L vacuum filtering flask or multiple place manifold.
» Learn More...
 

< Back to Top

 
 
Vacuum Filter Holders - Accessories
 
Filtering Flasks
For vacuum filtration with Millipore filter holders
Side arm connects to vacuum source with 3/8in. I.D. hose. 1 L and 4 L flasks accept no. 8 perforated stopper. 125 mL flask accepts no. 5 stopper. » Learn More...

Vacuum/Pressure Pump
For flow rates of up to 37 L/min
The High Output Pump features a piston-driven design for greater power. » Learn More...

Aerosol Analysis Accessories
Aerosol adapter and flow-limiting orifices
Creates quantitative airflow through a Millipore filter for airborne contamination analysis. » Learn More...

MF Filter Forceps
For safe handling of filter membranes
Handle Millipore membrane filters without damage using highly polished stainless steel forcep blades with beveled, unserrated tips. Sterilize by autoclaving or flame. » Learn More...
 

< Back to Top

 
  
Pressure Filter Holders - Stainless Steel
 
Stainless Steel Filter Holders
For 13 and 25 mm disc filters
Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. » Learn More...

Stainless Steel Filter Holders
For 47mm disc filters
Use to ultraclean or sterilize small volumes via gas pressure filtration through suitable membrane supported on holder base. » Learn More...

Stainless Steel Filter Holders
For 90 and 142 mm disc filters
Ultraclean or sterilize liquids or gases by pressure filtration. Autoclave with Durapore filter in place. » Learn More...

Stainless Steel Filter Holders
For 25 and 47 mm disc filters
For filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved. » Learn More...

Solvent Filtering Dispenser
For 25 mm disc filters
Ultraclean and dispense small volumes of solvent by squeeze-bottle action. Hand-pressure operated dispenser with filter holder fitted with a delivery tube. Use to direct filtered solvent against surfaces.
» Learn More...

Filterjet™ Solvent Dispenser
For 25 mm disc filters
Use to spray a concentrated jet of ultraclean solvent or rinse solution on surfaces for cleaning. Filter holder, XX40 025 00, which is part of the dispenser, can also be used by itself for in-line pressure filtration of gases. » Learn More...

Hazardous Waste Filtration System
For 142 mm disc filters
USEPA EP Toxicity Test and Toxicity Characteristic Leaching Procedure (TCLP) product. » Learn More...

ZHE Hazardous Waste Filtration System
For 90 mm disc filters
Millipore's ZHE (Zero Head Space Extractor) system has been designated by the USEPA as a suitable apparatus for Toxicity Characteristic Leaching Procedure (TCLP). » Learn More...
 

< Back to Top

 
 
Pressure Filter Holders - Polyproplyene
 
In-Line Filter Holder
For 47 mm disc filters
Ultraclean liquids or gases in-line by pressure filtration. Open for filter change without disturbing attached plumbing. » Learn More...

Swinnex® Filter Holders
For 13, 25 and 47 mm disc filters
Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect Swinnex 47 mm with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes. » Learn More...
 

< Back to Top

Find Lab Filtration Products

Use the section below to browse specific products for your needs.

Application Area

Product Type
Contact Us

We want to hear from you. Contact a specific department below or click "Suggestions and Feedback" to send your comments.