Pressure Filtration Syringe Filter and Filter Holders

• For Volumes < 1 mL
• For Volumes 1 - 10 mL
• For Volumes 10 - 100 mL
• For Volumes > 100 mL

• HPLC Certified
• Ion Chromatography Certified
• Automation Compatible
• High Particulate Filtration
• Syringe filters with PVC Housings

Syringe-driven filter units, non-sterile, specifically developed for sample preparation before instrumental analysis.

Syringe-driven filter units, non-sterile, specifically developed for sample preparation before instrumental analysis.

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect Swinnex 47 mm with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes.

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe.

Non-sterile Millex filter units are now available in a new, larger 33 mm housing with Millipore Express PLUS (PES) or Durapore (PVDF) membrane.

Syringe-driven filter units, non-sterile, specifically developed for sample preparation before instrumental analysis.

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect Swinnex 47 mm with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes.

For filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved.

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe.

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect Swinnex 47 mm with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes.

Ultraclean liquids or gases in-line by pressure filtration. Open for filter change without disturbing attached plumbing.

Ultraclean or sterilize liquids or gases by pressure filtration. Autoclave with Durapore filter in place.

Use to spray a concentrated jet of ultraclean solvent or rinse solution on surfaces for cleaning. Filter holder, XX40 025 00, which is part of the dispenser, can also be used by itself for in-line pressure filtration of gases.

Syringe-driven filter units, non-sterile, specifically developed for sample preparation before instrumental analysis.

IC Millex filter units are available in both 13 and 25 mm diameters. The 13 mm units are recommended for filtering volumes from 1 to 10 mL. The 25 mm units are recommended for filtering volumes from 10 to 100 mL.

< Back to Top

High density polyethylene housing and a wide choice of membrane types, with or without prefilter, to fit any application need..

Two to four times greater throughput than syringe filters without prefilters. Compatible with automated systems, including Zymark's workstations. Low-extractable polypropylene housing.

Millex syringe-driven filter units are available in 0.22, 0.45, 0.8 and 5.0 micron pore sizes with PVC or Eastar copolyester housings. Membranes available include glass fiber AP20, MF-Millipore (mixed cellulose esters), Durapore (PVDF) or Millipore Express (PES).

< Back to Top